Pages: [1]
Author Topic: Help finding KFVPDKSD - my latest 115G SW 389075 mappack attached  (Read 6403 times)
ericpaulyoung
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 149



So in my attempt to fix partial throttle surge after installing a larger (76mm) throttle body and a higher tension wastegate spring, I have tracked down the following:

KFVPDKSE
KFMSNWDKVP
KFXDKMSNVP

These are all included in the attached 115G mappack, but I need help finding:

KFVPDKSD

I have been looking for a while, but I can't seem to track it down. Any help is appreciated.
Eric
Logged
ericpaulyoung
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 149


« Reply #1 on: April 30, 2015, 01:53:07 AM »

OK, found it. Also I corrected the IRL/IOP maps as they were not correct, and added a couple others I found when I was comparing with a Seat Leon 115H file to find the KFVPDKSD map.

New mappack attached.

Eric
Logged
ericpaulyoung
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 149


« Reply #2 on: April 30, 2015, 02:24:47 AM »

Nevermind, I found KFVPDKLD and not KFVPDKSD. So I still am looking for the "SD" map.

Eric
Logged
ericpaulyoung
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 149


« Reply #3 on: April 30, 2015, 06:52:30 AM »

I don't think ME9 uses the dynamic map. I have checked 3 mappacks and associated ori files for 3 different versions of ME9.1 and none of them have the KFVPDKSD defined in them. Maybe ME9 uses a separate axis or a scaler to interpret the SE map?

Eric
Logged
ericpaulyoung
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 149


« Reply #4 on: April 30, 2015, 07:05:18 AM »

I just searched the ME9.1 Funktionsrahmen and KFVPDKSD does not show up anywhere in the document.

EPY
Logged
ericpaulyoung
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 149


« Reply #5 on: April 30, 2015, 02:39:30 PM »

Seriously not a single one of you Motronic brainchildren have a single hint? Oh the humanity!

epy
Logged
m1ke
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #6 on: May 23, 2015, 07:49:30 AM »

English Version Attached.

Have found a simple way to translate...

Export Maps as csv from winols for newer versions

Import above sheet into google sheets and run the google translate function

Export as csv.

Open in notepad and find and replace , with ;

Reimport into winols.
Logged
ericpaulyoung
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 149


« Reply #7 on: May 26, 2015, 08:46:34 PM »

Cool. Thanks!

EPY
Logged
teobolo
Full Member
***

Karma: +24/-6
Offline Offline

Posts: 112


« Reply #8 on: February 03, 2016, 02:11:14 PM »

cool !Thanks!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 16 queries. (Pretty URLs adds 0s, 0q)