Pages: 1 [2] 3 4 ... 32
Author Topic: Logging ME7 fast and flexible => ME7Logger  (Read 204313 times)
Jason
Sr. Member
****

Karma: +36/-0
Offline Offline

Posts: 499


Breaks everything!


« Reply #15 on: July 31, 2011, 03:19:31 PM »

Complacentsee, line 40 needs a ; instead of a ,  (fr_w)

edit:  Also line 53
Logged
Complacentsee
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 2


« Reply #16 on: July 31, 2011, 03:27:49 PM »

Thanks. I added those last minute and forgot to change it. The corrected file should be up now.
Logged
Jason
Sr. Member
****

Karma: +36/-0
Offline Offline

Posts: 499


Breaks everything!


« Reply #17 on: July 31, 2011, 04:02:32 PM »

Is there any interest in an app that reads the stdout and combines it with values sampled from an innnovate LC-1?
Logged
nyet
Administrator
Hero Member
*****

Karma: +374/-42
Offline Offline

Posts: 8674


WWW
« Reply #18 on: July 31, 2011, 04:15:19 PM »

btw ECUxPlot will overlay zeitronix data on top of an existing log...

I could add innovate support, but I dont have log data to test with.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Jason
Sr. Member
****

Karma: +36/-0
Offline Offline

Posts: 499


Breaks everything!


« Reply #19 on: July 31, 2011, 04:18:37 PM »

Are you just aligning the logs by looking at the narrowband values or does Zeitronix log RPM?  My issue is that I don't want to buy more innovate stuff just to log the wideband against RPM.
Logged
phila_dot
Hero Member
*****

Karma: +156/-11
Offline Offline

Posts: 1701


« Reply #20 on: July 31, 2011, 04:31:24 PM »

Zeitronix ZT-2 logs wideband and RPM.
Logged
Jason
Sr. Member
****

Karma: +36/-0
Offline Offline

Posts: 499


Breaks everything!


« Reply #21 on: July 31, 2011, 05:01:27 PM »

That is the problem with the innovate stuff... no RPM unless you add another box.
Logged
nehalem
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 617


« Reply #22 on: July 31, 2011, 09:28:52 PM »

I'd definitely want to see LC-1 support!  Thats a really good package...
Logged
nyet
Administrator
Hero Member
*****

Karma: +374/-42
Offline Offline

Posts: 8674


WWW
« Reply #23 on: July 31, 2011, 09:39:00 PM »

Ugh. not if there is no RPM support. forget it. Too hard to sync with other logs.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
s4rmm
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 28


« Reply #24 on: August 01, 2011, 02:35:44 AM »

Anybody got it working with Ross-Tech USB cable?

If your cable works with NefMoto or ECUx, it should work no problem. You may have to set it to dumb mode. My blue KKL cable works perfectly.
It works with NefMoto and with VCDS, it is in dumb mode. I created virtual comport (usb to serial), configured as COM2 or COM7, but did not manage to connect.
Logged
ElementalVoid
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 43


« Reply #25 on: August 01, 2011, 07:23:21 AM »

Ugh. not if there is no RPM support. forget it. Too hard to sync with other logs.

I went with the Innovate stuff but I did get the extra box required to do RPM, I didn't see a huge gain to getting wideband AFR without being able to correlate it to other log measurements.

When I get a log with both (missing a cable that didn't get shipped) I'll post it.
Logged
setzi62
Full Member
***

Karma: +126/-0
Offline Offline

Posts: 249


« Reply #26 on: August 01, 2011, 08:24:40 AM »

just a quick suggestion / thought.

is there anyway you can add an option to do "synched timing".

this means if i enable / config the logger to use "synched timing", it will start the log exactly on the computer's clock second:  aka  11:05:10.0000 AM    like that?

this would greatly assist users to fuse multiple logging sources...  just a thought!
Is the timestamp really used to sync logs from different sources? From what I read here,
a synchronization would be made by comparing rpm data.
But yes, I could implement something like this. Also an option to get absolute timestamps
instead of relative time since start would be possible. Have to make some tests ....
Logged
setzi62
Full Member
***

Karma: +126/-0
Offline Offline

Posts: 249


« Reply #27 on: August 01, 2011, 08:30:36 AM »

It works with NefMoto and with VCDS, it is in dumb mode. I created virtual comport (usb to serial), configured as COM2 or COM7, but did not manage to connect.

What is the output? Just telling it can't connect or something more?
Are you referencing the right ecu characteristics file in your trace config?
If a wrong characteristics file is used, the logger could try to connect to a
wrong address.
Logged
phila_dot
Hero Member
*****

Karma: +156/-11
Offline Offline

Posts: 1701


« Reply #28 on: August 01, 2011, 08:34:29 AM »

Anybody got it working with Ross-Tech USB cable?

If your cable works with NefMoto or ECUx, it should work no problem. You may have to set it to dumb mode. My blue KKL cable works perfectly.
It works with NefMoto and with VCDS, it is in dumb mode. I created virtual comport (usb to serial), configured as COM2 or COM7, but did not manage to connect.

The default is COM2 for the logger.
Logged
infinkc
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 94


« Reply #29 on: August 01, 2011, 08:57:08 AM »

That is the problem with the innovate stuff... no RPM unless you add another box.

yea i landed up getting the ot2 to log the rpm with the innovate wideband, i figured that was easier than getting their other input box where you have to configure the rpm signal.
Logged

Pages: 1 [2] 3 4 ... 32
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)