Logging ME7 fast and flexible => ME7Logger

Pages: 1 ... 31 32 [33]

« previous next »

Author

Topic: Logging ME7 fast and flexible => ME7Logger (Read 229977 times)

Khendal

Full Member

Karma: +6/-6
Offline

Offline

Posts: 185

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #480 on: February 12, 2019, 02:53:23 PM »

One question...at the moment with last VCDS Genuine Cable...is it possible to use ME7Logger?


	Logged

nyet

Administrator
Hero Member

Karma: +427/-53
Offline

Offline

Posts: 9698

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #481 on: February 12, 2019, 03:01:33 PM »

yes

disable intelligent mode. You will need to install the VCP driver if you want to use ME7L with a com port (more stable on SOME machines)


	Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.

vwaudiguy

Hero Member

Karma: +47/-35
Offline

Offline

Posts: 1973

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #482 on: February 12, 2019, 05:47:57 PM »

Quote from: Khendal on February 12, 2019, 02:53:23 PM

One question...at the moment with last VCDS Genuine Cable...is it possible to use ME7Logger?

Last genuine cable is the wifi one (can also use with a cable). Was told by VCDS these would not work as a pass through like the previous generation. Never tried based on this infoz.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

nyet

Administrator
Hero Member

Karma: +427/-53
Offline

Offline

Posts: 9698

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #483 on: February 13, 2019, 10:23:37 AM »

Quote from: vwaudiguy on February 12, 2019, 05:47:57 PM

Last genuine cable is the wifi one (can also use with a cable). Was told by VCDS these would not work as a pass through like the previous generation. Never tried based on this infoz.

Sorry, I thought the poster meant the last USB version.

Yes, the wifi version will not work.


	Logged

Khendal

Full Member

Karma: +6/-6
Offline

Offline

Posts: 185

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #484 on: February 17, 2019, 02:05:02 PM »

Quote from: nyet on February 12, 2019, 03:01:33 PM

yes

disable intelligent mode. You will need to install the VCP driver if you want to use ME7L with a com port (more stable on SOME machines)

I have the last not wifi cable

so should work.

What does intelligent mode do in VCDS? After disable...can i use like always VCDS?
Which one are the best vcp driver to install?

Thanks


	Logged

nyet

Administrator
Hero Member

Karma: +427/-53
Offline

Offline

Posts: 9698

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #485 on: February 17, 2019, 04:38:59 PM »

Quote from: Khendal on February 17, 2019, 02:05:02 PM

What does intelligent mode do in VCDS? After disable...can i use like always VCDS?

It puts the cable into VCDS mode as soon as it detects any ECU. It screws up all non-vcds programs, but can speed VCDS launch time.

If you disable it, VCDS will still work

Quote

Which one are the best vcp driver to install?

As far as I know there is only one; the one from RossTech and it is super old. It isn't a must have, but some ftdi obdii programs will not work with direct usb.


	Logged

BlackT

Sr. Member

Karma: +8/-3
Offline

Offline

Posts: 318

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #486 on: April 19, 2019, 12:26:32 PM »

How to find mimax and mibas on ME7.5 ? What metod are you using?


	Logged

BlackT

Sr. Member

Karma: +8/-3
Offline

Offline

Posts: 318

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #487 on: April 29, 2019, 06:16:12 AM »

Quote from: BlackT on April 19, 2019, 12:26:32 PM

How to find mimax and mibas on ME7.5 ? What metod are you using?

Bump


	Logged

flamy

Jr. Member

Karma: +4/-0
Offline

Offline

Posts: 31

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #488 on: July 19, 2019, 12:20:38 PM »

Quote from: armageddon on July 02, 2018, 01:32:19 PM

http://nefariousmotorsports.com/forum/index.php?;topic=14119.0

for rs4 k-box:

0x35FD2 - 3D 06 -> CC 00
0x77DE4 - 3D 08 -> CC 00
0x78CB6 - 3D 03 -> CC 00

At first, I still had the known problem of successful connection on the bench and no successful connection in the car after patching this,
but now I figured out a working configuration for the RS4 with K-Box and without any modifications on the wiring harness.
Please find attached my *.ecu-file.

The problem was that ME7info created the file with "Connect = SLOW-0x11" (and optional "Connect = FAST-0x01" as a comment).
Changing that to "Connect = SLOW-0x00" and adding "DoubleDelay = 12" did the trick.

And btw: It also connects while running engine.


« Last Edit: July 22, 2019, 08:39:51 AM by flamy »	Logged

armageddon

Sr. Member

Karma: +17/-2
Offline

Offline

Posts: 305

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #489 on: July 24, 2019, 03:00:54 AM »

You have to use the two, the "pach" and SLOW-0x00 conection.

Works here with k-box and M-box (origina euro S4 with G-box)


	Logged

Pages: 1 ... 31 32 [33]

« previous next »

Jump to:

Navigation

Personal Tools

August 20, 2019, 08:11:24 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search