Pages: 1 ... 31 32 [33] 34
Author Topic: Logging ME7 fast and flexible => ME7Logger  (Read 464730 times)
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226


« Reply #480 on: February 12, 2019, 02:53:23 PM »

One question...at the moment with last VCDS Genuine Cable...is it possible to use ME7Logger?  Smiley
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #481 on: February 12, 2019, 03:01:33 PM »

yes

disable intelligent mode. You will need to install the VCP driver if you want to use ME7L with a com port (more stable on SOME machines)
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #482 on: February 12, 2019, 05:47:57 PM »

One question...at the moment with last VCDS Genuine Cable...is it possible to use ME7Logger?  Smiley

Last genuine cable is the wifi one (can also use with a cable). Was told by VCDS these would not work as a pass through like the previous generation. Never tried based on this infoz.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #483 on: February 13, 2019, 10:23:37 AM »

Last genuine cable is the wifi one (can also use with a cable). Was told by VCDS these would not work as a pass through like the previous generation. Never tried based on this infoz.

Sorry, I thought the poster meant the last USB version.

Yes, the wifi version will not work.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226


« Reply #484 on: February 17, 2019, 02:05:02 PM »

yes

disable intelligent mode. You will need to install the VCP driver if you want to use ME7L with a com port (more stable on SOME machines)


I have the last not wifi cable Smiley so should work.

What does intelligent mode do in VCDS? After disable...can i use like always VCDS?
Which one are the best vcp driver to install?

Thanks Smiley
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #485 on: February 17, 2019, 04:38:59 PM »

What does intelligent mode do in VCDS? After disable...can i use like always VCDS?

It puts the cable into VCDS mode as soon as it detects any ECU. It screws up all non-vcds programs, but can speed VCDS launch time.

If you disable it, VCDS will still work

Quote
Which one are the best vcp driver to install?

As far as I know there is only one; the one from RossTech and it is super old. It isn't a must have, but some ftdi obdii programs will not work with direct usb.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #486 on: April 19, 2019, 12:26:32 PM »

How to find mimax and mibas on ME7.5 ? What metod are you using?
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #487 on: April 29, 2019, 06:16:12 AM »

How to find mimax and mibas on ME7.5 ? What metod are you using?
Bump
Logged
flamy
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 56


« Reply #488 on: July 19, 2019, 12:20:38 PM »

http://nefariousmotorsports.com/forum/index.php?;topic=14119.0

for rs4 k-box:

0x35FD2 - 3D 06 -> CC 00
0x77DE4 - 3D 08 -> CC 00
0x78CB6 - 3D 03 -> CC 00
At first, I still had the known problem of successful connection on the bench and no successful connection in the car after patching this,
but now I figured out a working configuration for the RS4 with K-Box and without any modifications on the wiring harness.
Please find attached my *.ecu-file.

The problem was that ME7info created the file with "Connect = SLOW-0x11" (and optional "Connect = FAST-0x01" as a comment).
Changing that to "Connect = SLOW-0x00" and adding "DoubleDelay = 12" did the trick.

And btw: It also connects while running engine.
« Last Edit: July 22, 2019, 08:39:51 AM by flamy » Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #489 on: July 24, 2019, 03:00:54 AM »

You have to use the two, the "pach" and SLOW-0x00 conection.

Works here with k-box and M-box (origina euro S4 with G-box)
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #490 on: September 28, 2019, 11:14:06 AM »

I'm trying to connect ME7Logger but it doesn't see ftd2xx.dll driver. I've tried to reinstall VCDS from
https://www.ross-tech.com/vcds/download/current.php

I installed VCP driver from
https://www.ftdichip.com/Drivers/VCP.htm

I tried to open ME7Logger as admin, but no luck.

Any help please?
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #491 on: September 28, 2019, 01:33:15 PM »

I'm trying to connect ME7Logger but it doesn't see ftd2xx.dll driver. I've tried to reinstall VCDS from
https://www.ross-tech.com/vcds/download/current.php

I installed VCP driver from
https://www.ftdichip.com/Drivers/VCP.htm

I tried to open ME7Logger as admin, but no luck.

Any help please?
I've solved it. I copied ftd2xx.dll to Wow64 folder (not System32),  because Windows 64bit.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #492 on: September 28, 2019, 04:09:27 PM »

I've solved it. I copied ftd2xx.dll to Wow64 folder (not System32),  because Windows 64bit.

I have never had to do that.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Lechuga
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 41


« Reply #493 on: December 12, 2019, 02:36:43 AM »

- Shared library (DLL) added (.so/.dll) for those who want to implement own logging solutions
   -> see directory "lib" in the ME7L .zip/.tgz files for description and example program.

I am trying to use the libME7Logger.dll provided in the 1.20 release but I get a memory error when I call "me7logger_config". I have tried this on two different PCs and I have also tried using the example.exe with the same result (it fails when calling _config).

Perhaps I am using it incorrectly? I have tried with a .cfg file created using VisualME7Logger.

Any assistance would be appreciated

Cheers!
Chris
Logged
jmont23
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 45


« Reply #494 on: May 26, 2020, 01:45:31 PM »

I most recently have been getting 20+ timeouts during 30 min logging sessions and its driving me crazy. Can someone tell me what error -16 is?

From logger:
Logged data size is 90 bytes.
Really logged are 54 entries with 90 bytes.
FTDI library version 30214
Start connecting to ECU at 24.05.2020 20:46:13.228
try connect slow(11)
=> FLASH (slowinit)
ecuid reports software version
Started session86, speed=56000
-> Read ECU ID's .... done
-> Checked ECU ID's
Found bootrom version 05.12/05.32 via readmem
Read pointer ... done
Store handler ... done
Verify handler ... done
Redirect pointer ... done
Test handler ... done
Opened logfile C:\loggerS4\ME7Logger 10-5-2016\logs\STK\PT6262 1200cc logs\Mikes tunes\8D0907551M_0001_Monty_FLEX_NLS_v11bv_CHK_log001.csv
-> Start logging (logdata size=90, 20 samples/second, 56000 baud) at 24.05.2020 20:46:16.348
Press ^C to stop logging
................Got error -16
20:46:33.156-187,8 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.156-803,0 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.212-522,2 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.213-949,1 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.270-037,8 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.271-363,3 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.328-071,9 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.329-765,3 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.386-855,4 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.388-223,4 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.444-392,8 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.445-808,4 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.501-807,3 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.503-309,7 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.559-343,5 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.560-753,2 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.616-780,3 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.617-586,6 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
20:46:33.674-265,7 os_sendbuf(len=3, data= 01 B7 B8)
20:46:33.674-825,9 os_rcvbyte(timeout=100) -> TIMEOUT
Got error -16
=> Logging failed
exiting (cause=0x4)...
Logged
Pages: 1 ... 31 32 [33] 34
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0s, 0q)