Has anyone with an Euro 2.7 gotten this to work?
I get this:
Logged data size is 72 bytes.
Start connecting to ECU at 23.01.2012 00:38:51.109
try connect slow(11)
try connect slow(11)
Could not connect
try connect slow(11)
22:38:56.656-252,0 os_setspeed(speed=10400)
22:38:56.963-321,4 os_receiver_off()
22:38:56.963-586,3 os_setbreak()
22:38:57.164-499,2 os_clrbreak()
22:38:57.365-932,4 os_setbreak()
22:38:57.566-520,4 os_setbreak()
22:38:57.767-140,4 os_setbreak()
22:38:57.968-995,3 os_clrbreak()
22:38:58.170-738,3 os_setbreak()
22:38:58.372-139,3 os_setbreak()
22:38:58.572-750,3 os_setbreak()
22:38:58.773-447,3 os_clrbreak()
22:38:58.775-066,5 os_receiver_on()
22:38:59.278-435,8 os_rcvbyte(timeout=500) -> TIMEOUT
try connect slow(11)
22:38:59.278-975,8 os_setspeed(speed=10400)
22:38:59.585-279,8 os_receiver_off()
22:38:59.585-555,8 os_setbreak()
22:38:59.787-078,9 os_clrbreak()
22:38:59.988-297,8 os_setbreak()
22:39:00.189-228,9 os_setbreak()
22:39:00.390-282,7 os_setbreak()
22:39:00.591-733,7 os_clrbreak()
22:39:00.792-797,8 os_setbreak()
22:39:00.994-333,8 os_setbreak()
22:39:01.195-425,8 os_setbreak()
22:39:01.396-525,9 os_clrbreak()
22:39:01.398-050,7 os_receiver_on()
22:39:01.901-669,2 os_rcvbyte(timeout=500) -> TIMEOUT
Could not connect
=> Could not connect to ECU, exiting ...
=> Logging failed
exiting (cause=0x4)...
VCDS Lite connects just fine using the same cable...
I have immo on the car, and what I notice is, a relay in the cluster makes a "click" when VCDS Lite connects, but not when ME7Logger connects.
On older motronics to use fast diag, the immo had to be bypassed.
Am I right in thinking, that I need to run a direct K-Line from the ECU into the diagnostic port for this to work?
Otherwise the immo is blocking all communication?