Logging ME7 fast and flexible => ME7Logger

Pages: 1 ... 28 29 [30] 31 32 ... 35

« previous next »

Author

Topic: Logging ME7 fast and flexible => ME7Logger (Read 535778 times)

roman_tyk

Full Member

Karma: +0/-0
Offline

Offline

Posts: 87

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #435 on: March 19, 2016, 02:26:05 PM »

Quote from: nyet on March 19, 2016, 10:18:10 AM

fr/fr2/frm/frm2?

looks different, maybe should i use some specific factor?


	Logged

RolandUsen

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Logging ME7 fast and flexible t ME7Logger « Reply #436 on: March 28, 2016, 04:36:58 AM »

Spec C, that will require someone to custom program that into a logger. A logger that already works.

I believe Calvin released his source if someone wants to hop on it.


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 826

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #437 on: March 28, 2016, 10:01:51 AM »

Friends sorry I have not readed whole thread, but exist any similar logger for MED9.1?


	Logged

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #438 on: April 02, 2016, 11:32:39 PM »

Quote from: golfputtputt on June 04, 2015, 08:00:25 PM

I keep getting can't load library ftd2xx.dll

Not sure what to do. I'm using the VCDS HEX+CAN cable.


	Logged

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #439 on: April 02, 2016, 11:49:43 PM »

Quote from: golfputtputt on June 04, 2015, 08:00:25 PM

I keep getting can't load library ftd2xx.dll

Not sure what to do. I'm using the VCDS HEX+CAN cable.

I have the same problem. The set up I have works ok on the w7 Dell I have but I recently went New Skool to W10 on a Toshiba.

I tried to post a screen shot of it but failed. The cut and paste below is what happens at the end. This is with FTDI selected.

Logged data size is 103 bytes.
Really logged are 61 entries with 102 bytes.
can't load library ftd2xx.dll
Initialization failed, exiting ...
exiting (cause=0x1)...

C:\Users\Jack Bauer\Desktop\ME7 LOGGER>

*******************************************EDIT*********************************************

So in the interests of being useful. I deleted the drivers for the VCDS cable and reloaded them from a fresh download of the VCP drivers from Ross-Tech. http://www.ross-tech.com/vag-com/usb/virtual-com-port.html

The drivers wouldn't update. I had to uninstall the cable and reinstall the drivers and now ME7 logger is off again.

I am surprised that I needed to do this as I have been using this laptop to flash ME7 ECU with nefmoto.

But I am willing to take on the win any way.

Gavin


« Last Edit: April 02, 2016, 11:54:10 PM by h100vw »	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #440 on: April 02, 2016, 11:53:39 PM »

VCP drivers, reinstall ftdi drivers.


« Last Edit: April 02, 2016, 11:55:47 PM by nyet »	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Tshirt2k

Full Member

Karma: +1/-0
Offline

Offline

Posts: 78

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #441 on: April 07, 2016, 02:09:49 PM »

Having a similar issue to some using this.

Can't connect to ECU with the ignition on.

Engine is a conversion but have wired in ECU and connected OBD port according to wiring diagram. Nothing else is connected in the k line. It is direct to pin 43 on the ECU.
VCDS works. I am using Hex com serial version. I can also read and write flash via the port using MPPS.

When using the GUI or visualme7logger, I can get it to run when the ignition is off but as soon as I try with ignition on it fails. Giving error -19

Anyone know what could cause this?

I'm am using the blue ftdi cable. Not sure if it's connected but I can't connect to ECU using an elm327 with torque app.

Seems to point to wiring but with other programs able to talk to the ECU I am unsure.


« Last Edit: April 10, 2016, 02:44:51 PM by Tshirt2k »	Logged

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #442 on: April 10, 2016, 06:18:32 PM »

Ignition on or engine running?


	Logged

Tshirt2k

Full Member

Karma: +1/-0
Offline

Offline

Posts: 78

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #443 on: April 12, 2016, 09:57:07 AM »

Both. If ignition is on or running. It disconnects.


	Logged

Tshirt2k

Full Member

Karma: +1/-0
Offline

Offline

Posts: 78

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #444 on: April 16, 2016, 11:33:49 AM »

Managed to get it working with my trusty Hex Com Vcds lead.
Connected straight away with no issues. At any baud rate except 125000

Blue cable must not work very well with it.


	Logged

Lauria112

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 39

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #445 on: May 26, 2016, 02:44:48 PM »

Hi,
Could someone please explain what are the differences between slow-0x11 and slow-0x00 connection settings?
I'm working to get logging working on raspberry but my ecu requires slow-0x00 connection so i would need to replicate that to mmll from trichard3000

Best regards
Lauri


	Logged

20VTMK1

Full Member

Karma: +0/-0
Offline

Offline

Posts: 113

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #446 on: June 07, 2016, 08:18:39 AM »

Hi All ,

Could some one please assist me .

I had a laptop crash and it came back to life with windows 10 . I tried re-installing ME7 logger and kept getting the "missing FTD2XX.DLL " message.

I then down loaded the FTD2XX.dll and placed it in the library folder of ME7 logger and also in the Windows system folder .

So now the me7 logger starts up but wont write to the log file and then wont log .

Am I missing something ?

Thanks in advance


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #447 on: June 07, 2016, 11:05:48 AM »

Quote from: 20VTMK1 on June 07, 2016, 08:18:39 AM

I then down loaded the FTD2XX.dll and placed it in the library folder of ME7 logger and also in the Windows system folder .

DO NOT DO THIS.

Delete any add on dlls from the me7logger dir and install the drivers properly, using the installer or the windows driver management console. You're just going to cause problems if you copy dlls around manually.


	Logged

20VTMK1

Full Member

Karma: +0/-0
Offline

Offline

Posts: 113

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #448 on: June 07, 2016, 12:12:47 PM »

Hi Nyet ,

Thanks for the reply . I tried all the installs , even via the windows device manager , manual driver update - no luck . I even downloaded the CMD exe file from the FTDI website - no luck

I now run the GUI as admin and it works ..

I did find libME7logger.dll in the lib folder tho'


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Logging ME7 fast and flexible => ME7Logger « Reply #449 on: June 07, 2016, 12:24:23 PM »

Quote from: 20VTMK1 on June 07, 2016, 12:12:47 PM

Thanks for the reply . I tried all the installs , even via the windows device manager , manual driver update - no luck . I even downloaded the CMD exe file from the FTDI website - no luck

That is a bad sign.

Quote

I now run the GUI as admin and it works ..

That's a good sign.

Quote

I did find libME7logger.dll in the lib folder tho'

That is part of the logging software, not the driver for your cable.


	Logged

Pages: 1 ... 28 29 [30] 31 32 ... 35

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 04:45:22 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search