NefMoto > Technical > Tuning > Homebrew to replace a AWE Stage 3 2000 S4 J box
Pages: 1 [2]
« previous next »
Author Topic: Homebrew to replace a AWE Stage 3 2000 S4 J box  (Read 16020 times)
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #15 on: June 11, 2015, 06:21:40 PM »
Quote from: yti21x7 on June 02, 2015, 01:56:33 PM
I do have a stock airbox so I'll have to play with MLHFM. I gather I should compare it to a more stock scalar and mod back that way.

A straight scale may not work either, and you also may need to massage KFKHFM... sorry man, but the AWE maf housing is just really really honking weird.

You'll likely need to drive around a while and log your stfts at various rpm/load points. Don't forget to disable LTFTs before logging STFTs!
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
yti21x7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #16 on: June 11, 2015, 09:38:02 PM »
Thanks, I don't have a B box image despite searching. Sold the stock one long ago.
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #17 on: June 12, 2015, 12:15:36 AM »
Just out of curiosity. Is AWEs Maf 90mm? What is special with it?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #18 on: June 12, 2015, 12:18:28 AM »
Quote from: Mocke on June 12, 2015, 12:15:36 AM
Just out of curiosity. Is AWEs Maf 90mm? What is special with it?

70mm inlet, 100mm at sensor. It is very very non-linear.

It's completely whack. They kept making bigger and bigger housings because they couldn't figure out how to do anything w/o crazy underscaled load.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #19 on: June 12, 2015, 12:33:33 AM »
Honestly, for the price of a straight housing, I'd just grab one. Unless you are SUPER budgeted, that's the way to do it. I have a few kicking around, I'll give you one for what I pay if you pm me.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #20 on: June 12, 2015, 12:53:00 AM »
Quote from: nyet on June 12, 2015, 12:18:28 AM
70mm inlet, 100mm at sensor. It is very very non-linear.

It's completely whack. They kept making bigger and bigger housings because they couldn't figure out how to do anything w/o crazy underscaled load.


hehe, thanx.
Logged
yti21x7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #21 on: June 12, 2015, 08:53:24 AM »
Quote
From 551B:

0x14ECC

00 FC   E0 FC 0C 00 F0 FF    AA FA 55 55 55

Replace the string at 0x10C75 in the L-box with the one above. Most of it will already be the same.

Unfortunately I'm still getting the

18321 - Pressure Sensor for Brake Boost (G294): Short to Ground
        P1913 - 35-00 -  -

after that and modifying CDBKVP instead of CDBKV. What is the address of for CDBKV so I can be sure I'm modifying the right value?


After that comes the logging and attempting to deal with the MAF issues. I keep telling myself it must flow more than stock so its worth it....
Logged
yti21x7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #22 on: June 12, 2015, 12:12:49 PM »
Quote
A straight scale may not work either, and you also may need to massage KFKHFM... sorry man, but the AWE maf housing is just really really honking weird.

You'll likely need to drive around a while and log your stfts at various rpm/load points. Don't forget to disable LTFTs before logging STFTs!

Ok, from what I read setting NORLA to 5 is the way to disable the LTFT's. What's the address for NORLA in L/M? It's not in the M xdf file that I have.

I've done some basic logging and I think the fueling is OK. When things go open loop I'm seeing a higher O2 voltage, like .8 V or so.  My noob understanding is that rich, do I need more? I know, I need a wideband but its going to be a bit before I have the time to deal with that.

TIA, Al
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #23 on: June 15, 2015, 10:06:18 AM »
NOLRA, not NORLA Tongue
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
yti21x7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #24 on: June 16, 2015, 10:23:46 AM »
Oops. I found a thread  with NOLRA at 0x18CD5. Hopefully that's right
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 08:44:12 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)