Hi all
newbie here I have recently installed a 3B0 920 929A cluster from a 2005 b5.5 passat into 2000 t4 transporter (eurovan) and I have a couple of questions if I may be so bold
I have sorted out the fuel gauge but I still have a couple of problems
the most important one is that I cannot set a custom k-value of my original 3407 without a Def error, the best I can do is choose the closest passat one of 3528,I have tried setting the last digit of the coding to 0 and recoding but the def error remains
I believe this is due to it being a VWK503 type? I realise its is to do with the checksum but is there an easy way to correct it?
I also have a question regarding the immobilizer, the new cluster is immo 3 as is my van but as the van uses a separate immo box I have had to install a second pickup ring to the cluster with a matched key taped to it to get rid of the annoying flashing light
this works fine so isn't exactly a problem but I was wondering if it is possible to get rid of the immob box and adapt the immobilizer in the cluster to the ecu without using the separate box?
thanks
Matt
