ESKONF Twice?

Pages: [1]

« previous next »

Author

Topic: ESKONF Twice? (Read 5684 times)

Jerry Tunin

Full Member

Karma: +4/-1
Offline

Offline

Posts: 121

	ESKONF Twice? « on: June 03, 2015, 10:08:14 PM »

I was looking through the following bin of mine at ESKONF and noticed it's in there twice... Which would I use?

0x10D34 -> 0x10D3A
&
0x10D3B -> 0x10D41


	Logged

Tuning Wiki
Jerry Tunin

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: ESKONF Twice? « Reply #1 on: June 03, 2015, 10:55:07 PM »

The first one is for the default coding. Check VARDEF to confirm. When in doubt, change them both.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

tao13

Sr. Member

Karma: +17/-47
Offline

Offline

Posts: 471

	Re: ESKONF Twice? « Reply #2 on: December 19, 2017, 08:53:54 AM »

Hi ALL
I have an 032Hn 1.8T ecu
I used eskonf tools and i found 2 maps like next
Only first looks like normal one
Please tell me whitch one must change for remove SAI
MANY MANY THANKS

## ESKONF_0 (Addr:00010C4D) -- AA FF 00 30 FF F8 30
b0:AA ZUE4(95)..:S(10) ZUE3(94)..:S(10) ZUE2(103).:S(10) ZUE1(102).:
S(10) ZUE=Ignition coil
b1:FF NC........:N(11) NC........:N(11) NC........:N(11) NC........:
N(11)
b2:00 EV4(89)...:Y(00) EV3(88)...:Y(00) EV2(97)...:Y(00) EV1(96)...:
Y(00) EV=Fuel injector
b3:30 LSHHK(63).:Y(00) EFLA(48)..:N(11) LDR(104)..:Y(00) TEV(64)...:
Y(00) LSHHK=Rear O2, EFLA=Error lamp, LDR=N75, TEV=N80 purgevalve
b4:FF BKV(22)...:N(11) NC(24)....:N(11) AAV(116)..:N(11) MIL(47)...:
Y(00) BKV=Brakebooster pump, AAV=Shutoff valve, MIL=OBD lamp
b5:F8 NC........:N(11) NC........:N(11) EKP(65)...:S(10) SLP(66)...:
Y(00) EKP=Fuel pump, SLP=J299 SAI pump
b6:30 ULT(105)..:Y(00) UAGR(114).:N(11) SLV(9)....:Y(00) NWS(115)..:
Y(00) ULT=N249 wg valve, UAGR=EGR valve, SLV=N112 SAI relay, NWS=n205 VVT

## ESKONF_1 (Addr:00025E69) -- FF FF 00 F0 3F F0 2C
b0:FF ZUE4(95)..:N(11) ZUE3(94)..:N(11) ZUE2(103).:N(11) ZUE1(102).:
N(11) ZUE=Ignition coil
b1:FF NC........:N(11) NC........:N(11) NC........:N(11) NC........:
N(11)
b2:00 EV4(89)...:Y(00) EV3(88)...:Y(00) EV2(97)...:Y(00) EV1(96)...:
Y(00) EV=Fuel injector
b3:F0 LSHHK(63).:N(11) EFLA(48)..:N(11) LDR(104)..:Y(00) TEV(64)...:
Y(00) LSHHK=Rear O2, EFLA=Error lamp, LDR=N75, TEV=N80 purgevalve
b4:3F BKV(22)...:Y(00) NC(24)....:N(11) AAV(116)..:N(11) MIL(47)...:
Y(00) BKV=Brakebooster pump, AAV=Shutoff valve, MIL=OBD lamp
b5:F0 NC........:N(11) NC........:N(11) EKP(65)...:Y(00) SLP(66)...:
Y(00) EKP=Fuel pump, SLP=J299 SAI pump
b6:2C ULT(105)..:Y(00) UAGR(114).:S(10) SLV(9)....:N(11) NWS(115)..:
Y(00) ULT=N249 wg valve, UAGR=EGR valve, SLV=N112 SAI relay, NWS=n205 VVT


	Logged

SB_GLI

Hero Member

Karma: +116/-10
Offline

Offline

Posts: 1022

	Re: ESKONF Twice? « Reply #3 on: December 19, 2017, 11:40:35 AM »

Quote from: tao13 on December 19, 2017, 08:53:54 AM

I used eskonf tools and i found 2 maps like next

that tool doesn't really work.


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: ESKONF Twice? « Reply #4 on: February 10, 2019, 08:20:47 AM »

I have same question,why two ESKONF
They same except 4. byte is different

If I want to do some modifications should I change only ESKONF?


	Logged

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Re: ESKONF Twice? « Reply #5 on: February 11, 2019, 02:26:06 AM »

the answer is in post nr2 and you can check and try to understand the difference in byte 4.
read about eskonf here https://s4wiki.com/wiki/Tuning#ESKONF


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: ESKONF Twice? « Reply #6 on: February 11, 2019, 10:10:00 AM »

I read that few times but still i cant figure out why two ESKONF.
Maybe is problem with my english, but I have no clue what ddillenger mean it in nr2 post in this tread. Undecided

I change both ESKONF and upload the flash, everything is working fine,but I don't like to do something that i don't understand. So I kindly ask you can you try to explain me little more better. Thank you in advance

Edit:
Hmm if I get it, first is for something like default settings of ECU. (Like the setting in mobile phone when we do hard reset)
A second one is USER settings, soft coding,adaption etc.
So changing both will be good decision Cheesy


« Last Edit: February 11, 2019, 10:22:28 AM by BlackT »	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Online

Online

Posts: 12271

	Re: ESKONF Twice? « Reply #7 on: February 11, 2019, 10:13:24 AM »

Depending on ECU coding it might use different ESCONFS

ECU coding is stored in EEPROM (e.g. automatic vs manual)


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: ESKONF Twice? « Reply #8 on: February 11, 2019, 10:23:56 AM »

I get it, thank you very much. Definitely best forum ever Wink


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

December 02, 2024, 02:03:52 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search