Pages: [1]
Author Topic: ESKONF Twice?  (Read 5097 times)
Jerry Tunin
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 121



WWW
« on: June 03, 2015, 10:08:14 PM »

I was looking through the following bin of mine at ESKONF and noticed it's in there twice...  Which would I use?

0x10D34 -> 0x10D3A
&
0x10D3B -> 0x10D41
Logged

ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: June 03, 2015, 10:55:07 PM »

The first one is for the default coding. Check VARDEF to confirm. When in doubt, change them both.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
tao13
Sr. Member
****

Karma: +16/-46
Offline Offline

Posts: 460


« Reply #2 on: December 19, 2017, 08:53:54 AM »

Hi ALL
I have an 032Hn 1.8T ecu
I used eskonf tools and i found 2 maps like next
Only first looks like normal one
Please tell me whitch one must change for remove SAI
MANY MANY THANKS

## ESKONF_0 (Addr:00010C4D) -- AA FF 00 30 FF F8 30
b0:AA    ZUE4(95)..:S(10)    ZUE3(94)..:S(10)    ZUE2(103).:S(10)    ZUE1(102).:
S(10)   ZUE=Ignition coil
b1:FF    NC........:N(11)    NC........:N(11)    NC........:N(11)    NC........:
N(11)
b2:00    EV4(89)...:Y(00)    EV3(88)...:Y(00)    EV2(97)...:Y(00)    EV1(96)...:
Y(00)   EV=Fuel injector
b3:30    LSHHK(63).:Y(00)    EFLA(48)..:N(11)    LDR(104)..:Y(00)    TEV(64)...:
Y(00)   LSHHK=Rear O2, EFLA=Error lamp, LDR=N75, TEV=N80 purgevalve
b4:FF    BKV(22)...:N(11)    NC(24)....:N(11)    AAV(116)..:N(11)    MIL(47)...:
Y(00)   BKV=Brakebooster pump, AAV=Shutoff valve, MIL=OBD lamp
b5:F8    NC........:N(11)    NC........:N(11)    EKP(65)...:S(10)    SLP(66)...:
Y(00)   EKP=Fuel pump, SLP=J299 SAI pump
b6:30    ULT(105)..:Y(00)    UAGR(114).:N(11)    SLV(9)....:Y(00)    NWS(115)..:
Y(00)   ULT=N249 wg valve, UAGR=EGR valve, SLV=N112 SAI relay, NWS=n205 VVT

## ESKONF_1 (Addr:00025E69) -- FF FF 00 F0 3F F0 2C
b0:FF    ZUE4(95)..:N(11)    ZUE3(94)..:N(11)    ZUE2(103).:N(11)    ZUE1(102).:
N(11)   ZUE=Ignition coil
b1:FF    NC........:N(11)    NC........:N(11)    NC........:N(11)    NC........:
N(11)
b2:00    EV4(89)...:Y(00)    EV3(88)...:Y(00)    EV2(97)...:Y(00)    EV1(96)...:
Y(00)   EV=Fuel injector
b3:F0    LSHHK(63).:N(11)    EFLA(48)..:N(11)    LDR(104)..:Y(00)    TEV(64)...:
Y(00)   LSHHK=Rear O2, EFLA=Error lamp, LDR=N75, TEV=N80 purgevalve
b4:3F    BKV(22)...:Y(00)    NC(24)....:N(11)    AAV(116)..:N(11)    MIL(47)...:
Y(00)   BKV=Brakebooster pump, AAV=Shutoff valve, MIL=OBD lamp
b5:F0    NC........:N(11)    NC........:N(11)    EKP(65)...:Y(00)    SLP(66)...:
Y(00)   EKP=Fuel pump, SLP=J299 SAI pump
b6:2C    ULT(105)..:Y(00)    UAGR(114).:S(10)    SLV(9)....:N(11)    NWS(115)..:
Y(00)   ULT=N249 wg valve, UAGR=EGR valve, SLV=N112 SAI relay, NWS=n205 VVT

Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #3 on: December 19, 2017, 11:40:35 AM »

I used eskonf tools and i found 2 maps like next

that tool doesn't really work.
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #4 on: February 10, 2019, 08:20:47 AM »

I have same question,why two ESKONF
They same except 4. byte is different


If I want to do some modifications should I change only ESKONF?
Logged
aef
Hero Member
*****

Karma: +69/-46
Online Online

Posts: 1566


« Reply #5 on: February 11, 2019, 02:26:06 AM »

the answer is in post nr2 and you can check and try to understand the difference in byte 4.
read about eskonf here https://s4wiki.com/wiki/Tuning#ESKONF
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #6 on: February 11, 2019, 10:10:00 AM »

I read that few times but still i cant figure out why two ESKONF.
Maybe is problem with my english, but I have no clue what ddillenger mean it in nr2 post in this tread.  Undecided
I change both ESKONF and upload the flash, everything is working fine,but I don't like to do something that i don't understand. So I kindly ask you can you try to explain me little more better. Thank you in advance

Edit:
Hmm if I get it, first is for something like default settings of ECU. (Like the setting in mobile phone when we do hard reset)
A second one is USER settings, soft coding,adaption etc.
So changing both will be good decision  Cheesy
« Last Edit: February 11, 2019, 10:22:28 AM by BlackT » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #7 on: February 11, 2019, 10:13:24 AM »

Depending on ECU coding it might use different ESCONFS

ECU coding is stored in EEPROM (e.g. automatic vs manual)

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #8 on: February 11, 2019, 10:23:56 AM »

I get it, thank you very much. Definitely best forum ever Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.036 seconds with 16 queries. (Pretty URLs adds 0s, 0q)