Pages: [1]
Author Topic: APR Something  (Read 7482 times)
aef
Hero Member
*****

Karma: +69/-46
Online Online

Posts: 1566


« on: June 14, 2015, 02:20:04 PM »

What is this Frame for?

Logged
thesnowman
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 21


« Reply #1 on: June 14, 2015, 03:29:11 PM »

To hold probes to connect to the board, boot pins and the such
Logged
aef
Hero Member
*****

Karma: +69/-46
Online Online

Posts: 1566


« Reply #2 on: June 15, 2015, 12:23:05 AM »

hmmm, i hoped this is to open the ecu easier....

To hold the probles i expected this kind of stuff
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #3 on: June 15, 2015, 10:00:21 AM »

Opening the ecus gets easier the more you do. I can do it now in about 20 seconds without damage. The trick is to go in at the corner near the connector and slide a long, thin blade screwdriver down the side, away from the connector. Pry up (don't push it INTO the case) and once you can get your hands under the corner, hulk out. Obviously do the side that isn't bonded to the PCB first.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)