Pages: [1]
Author Topic: who can code out ABS/TRACTION CONTROL?  (Read 5872 times)
plynch
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9


« on: June 17, 2015, 10:07:29 AM »

24v 2003 gli engine, harness, complete swapped over to a non-can bus car- no signal from abs/traction control- soft rev limit at 4100 rpm- all speedo signals work- car works perfect other than this- um, c2 and other have the ability to fix with a patch file- willing to pay as much as half price for the file for an 022 906 032 CS ecm



.
Logged
plynch
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9


« Reply #1 on: June 17, 2015, 10:08:50 AM »

Wednesday,17,June,2015,11:13:19:07540
VCDS Version: Release 14.10.2 (x64)
www.Ross-Tech.com

                Address 01: Engine       Labels: 022-906-032-BDF.lbl
Control Module Part Number: 022 906 032 CS
  Component and/or Version: MOTRONIC ME7.1.1G   0006
           Software Coding: 00032
            Work Shop Code: WSC 33278 
           Additional Info: 3VWVH69M63M142407     VWZ7Z0B6594343
                      VCID: 5EB81B30DA2AE1D13C3-513C
2 Faults Found:

17881 - EVAP Leak Detection Pump
            P1473 - 35-00 - Open Circuit---------> WIRE NOT CONNECTED TO ANYTHING AT FIREWALL- NO PIN CAR-SIDE
16885 - Vehicle Speed Sensor
            P0501 - 35-00 - Implausible Signal------------->SPEEDOMETER WORKS AS IT SHOULD?!
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #2 on: July 01, 2015, 10:41:12 AM »

Please don't clutter the wrong forum when posting.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)