NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > a3 3.2 no programming and turbo?
Pages: [1]
« previous next »
Author Topic: a3 3.2 no programming and turbo?  (Read 4668 times)
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136
« on: June 20, 2015, 07:34:28 AM »
I'm  installing turbo, and thinking that what to do with the wastegate. No program yet, so leave wastegate open or what?
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420
« Reply #1 on: June 20, 2015, 08:14:38 AM »
Do not leave it not connected. You should connect it to boost source so it would not exceed pressure set by actuator spring.

I am afraid even with wastegate stuck open you can see some low boost level so I would not drive it without proper software/injectors/MAF setup.
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #2 on: June 20, 2015, 01:34:27 PM »
And good luck finding someone who makes it run properly also.
You can count the amount of people who can do it on your fingers.

WG should be connected directly to turbo inlet, but it will never reach this boost, you will get throttle cut all the time.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136
« Reply #3 on: July 02, 2015, 06:46:28 AM »
Turbo installed and did drive carefully, boost is about 0.2bar. As soon as the pressure starts to buld the engine starts to knock, not logged yet just hearing windows down. Clone mpps arrived, should start to bricking the ecu, was it that st10c167 only bootmode?
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #4 on: July 19, 2015, 04:34:32 AM »
Quote from: Mikhail on July 02, 2015, 06:46:28 AM
Turbo installed and did drive carefully, boost is about 0.2bar. As soon as the pressure starts to buld the engine starts to knock, not logged yet just hearing windows down. Clone mpps arrived, should start to bricking the ecu, was it that st10c167 only bootmode?

Im currently running 3.2 Me7.1.1G ECU with GT35 turbo boosting 0.7bar on E85 Stock compression.
Logged
E85oholic
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #5 on: July 21, 2015, 04:12:10 PM »
And also i want to add that this engine with turbo is a dream so i can understand why people struggle with this.. 3.2liter VR6 Turbo is a wet dream for many.. and the sound is more than any other VAG car... even the I5 Tongue lolololo
Logged
E85oholic
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 04:39:36 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)