NefMoto > ECU Files > ECU Definition Files > 1ML906032A XDF with setzi Launch & Flat shift (updated with overrun maps)
Pages: [1]
« previous next »
Author Topic: 1ML906032A XDF with setzi Launch & Flat shift (updated with overrun maps)  (Read 11580 times)
tonybig78
Jr. Member
**

Karma: +4/-7
Offline Offline

Posts: 46
Hi this is my XDF for 1ML906032A.

Includes 200 maps.

Also included parameters for Setzi launch control and flat shift after adding the code.

https://www.youtube.com/watch?v=WYR_1um69_E
https://www.youtube.com/watch?v=B4HrLDlpxu0
« Last Edit: June 22, 2015, 09:07:59 AM by tonybig78 » Logged
tonybig78
Jr. Member
**

Karma: +4/-7
Offline Offline

Posts: 46
« Reply #1 on: June 22, 2015, 07:48:00 AM »
Updated version with overrun tables.
Logged
tonybig78
Jr. Member
**

Karma: +4/-7
Offline Offline

Posts: 46
« Reply #2 on: June 22, 2015, 08:53:29 AM »
Forgot to add KFNWEGM so here is the update.

If anyone wants me to add anything else just drop me a message.
Logged
smith345
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
Hi. This has been so handy thank you. Would you be able to add kfnwse for cam changeover please?
Logged
vara82
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 64
Quote from: tonybig78 on June 21, 2015, 01:57:38 PM
... after adding the code.

Great work, much thanks for the XDF... It helps me a lot!

One question: To activate Launch Control and Flat Shift which Code i have to add where?!

Best regards,
Flo

/edit: Now i found where i´ve to add the code. Changing the call function is already done.
Now i´ve to put the code in there... Perhaps you can tell me the code?! That would be very very nice...
« Last Edit: May 31, 2016, 01:38:07 AM by flo_wf » Logged
Joker68
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 23
Great work can you help me with me file? 6k0906032 ?
Logged
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
« Reply #6 on: November 26, 2016, 02:55:33 PM »
Hello... is it possible to have a .dam or .a2l files?

Xdf is for TunerPro ?

Sorry for this question...i'm a noob Smiley
Logged
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
« Reply #7 on: December 17, 2016, 03:43:55 AM »
Quote from: flo_wf on May 30, 2016, 11:34:58 PM
Great work, much thanks for the XDF... It helps me a lot!

One question: To activate Launch Control and Flat Shift which Code i have to add where?!

Best regards,
Flo

/edit: Now i found where i´ve to add the code. Changing the call function is already done.
Now i´ve to put the code in there... Perhaps you can tell me the code?! That would be very very nice...

Have you found where? Is it working? Smiley
Logged
fa2st
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« Reply #8 on: December 19, 2016, 11:55:25 AM »
thanks for sharing!
Logged
Dejw0089
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 100
« Reply #9 on: February 18, 2017, 03:34:06 AM »
Can you add ori file bin?
Logged
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
Do you need ori file yet?

Anyone of you have a full damos file? Smiley
Logged
grantyboy91
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
Hello Chaps, been lurking on here for a while with my leon, i was having issues with the scaling of KFVPDKSD & KFVPDKSE, the data tables are looking in the correct spots, the table scaling was off though so i`ve adjusted that and also put in two new tables under the boost section if anyone wants/needs to scale this as required.

Hope this is helps !

Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 01:43:27 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)