EGT removal and unplug.... LAMKAML needs to be 1

Pages: [1]

« previous next »

Author

Topic: EGT removal and unplug.... LAMKAML needs to be 1 (Read 4582 times)

tonybig78

Jr. Member

Karma: +3/-7
Offline

Offline

Posts: 46

	EGT removal and unplug.... LAMKAML needs to be 1 « on: June 21, 2015, 03:05:39 PM »

For those looking to completely remove the egt you need to set all of this table to 1 and do a throttle body calibration or you will get lambda at 0.951 at random times.

Hope this helps you as it did my head in trying to find out why after follwing the s4 wiki i was still getting this value on idle!

Enjoy.......


	Logged

robsa6

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 29

	Re: EGT removal and unplug.... LAMKAML needs to be 1 « Reply #1 on: July 01, 2015, 06:22:42 PM »

Care to share the location of this?


	Logged

tjwasiak

Sr. Member

Karma: +26/-0
Offline

Offline

Posts: 420

	Re: EGT removal and unplug.... LAMKAML needs to be 1 « Reply #2 on: July 02, 2015, 01:40:46 AM »

Quote from: robsa6 on July 01, 2015, 06:22:42 PM

Care to share the location of this?

You have to mention exact ECU HW/SW numbers as locations are different even between SW versions.


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12233

	Re: EGT removal and unplug.... LAMKAML needs to be 1 « Reply #3 on: July 02, 2015, 10:07:47 AM »

Quote from: robsa6 on July 01, 2015, 06:22:42 PM

Care to share the location of this?

Did you bother checking the various map packs already available?

For example, the 2.7t ones avail on my site
http://nyet.org/cars/files/defs/

Code:

nyet@bufud~/src/ecuxplot/data$ grep LAMKAML *.csv
4Z7907551R.csv:"LAMKAML","0x2af26","Lambdasollwert f▒r Katalysator-Ausr▒umen (luftmassenabh▒ngig)","5x1","16 Bit (LoHi)","-","-","kg/h","-","2.44140625E-4","4.0","1.0","0.8798828125","0.929931640625","0xe14","0xee1"
4Z7907551R.csv:"LAMKAML2","0x2af30","Lambdasollwert f▒r Katalysator-Ausr▒umen (luftmassenabh▒ngig), Bank 2","5x1","16 Bit (LoHi)","-","-","kg/h","-","2.44140625E-4","4.0","1.0","0.8798828125","0.929931640625","0xe14","0xee1"
8D0907551F.csv:"LAMKAML","0x1f6c2","Lambdasollwert f▒r Katalysator-Ausr▒umen (luftmassenabh▒ngig)","5x1","16 Bit (LoHi)","-","-","kg/h","-","2.44140625E-4","4.0","1.0","0.8798828125","0.929931640625","0xe14","0xee1"
8D0907551F.csv:"LAMKAML2","0x1f6cc","Lambdasollwert f▒r Katalysator-Ausr▒umen (luftmassenabh▒ngig), Bank 2","5x1","16 Bit (LoHi)","-","-","kg/h","-","2.44140625E-4","4.0","1.0","0.8798828125","0.929931640625","0xe14","0xee1"
8D0907551G.csv:"LAMKAML","0x1f120","Lambdasollwert f▒r Katalysator-Ausr▒umen (luftmassenabh▒ngig)","5x1","16 Bit (LoHi)","-","-","kg/h","-","2.44140625E-4","4.0","1.0","0.8798828125","0.929931640625","0xe14","0xee1"
8D0907551G.csv:"LAMKAML2","0x1f12a","Lambdasollwert f▒r Katalysator-Ausr▒umen (luftmassenabh▒ngig), Bank 2","5x1","16 Bit (LoHi)","-","-","kg/h","-","2.44140625E-4","4.0","1.0","0.8798828125","0.929931640625","0xe14","0xee1"


	Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.

robsa6

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 29

	Re: EGT removal and unplug.... LAMKAML needs to be 1 « Reply #4 on: July 03, 2015, 02:33:04 AM »

thank you. I looked at the xdfs id been working off of. so no, I guess not. thanks again


	Logged

acc

Newbie

Karma: +0/-0
Offline

Offline

Posts: 1

	Re: EGT removal and unplug.... LAMKAML needs to be 1 « Reply #5 on: October 05, 2015, 11:09:14 PM »

right before LAMKAML, there is CLRSKA "Code-Wort Funktionsart Kat-Ausräumen",
after set to 0, there is no more random 0,95 lambda. consumption seems to go down a little bit.

8N0906018H: CLRSKA: 19E5D, LAMKAML: 19E64


	Logged

prj

Hero Member

Karma: +915/-426
Offline

Offline

Posts: 5836

	Re: EGT removal and unplug.... LAMKAML needs to be 1 « Reply #6 on: October 07, 2015, 02:28:29 PM »

EGT removal has nothing whatsoever to do with this.

Rear o2 removal does, in that case you have to set CLRSKA or CLRKA (narrowband) to 0.


	Logged

PM's will not be answered, so don't even try.
Log your car properly.

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 19, 2024, 09:43:10 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search