Pages: [1]
Author Topic: Audi A3 1.8T Bosch ME7.5.5  (Read 5576 times)
dope40
Jr. Member
**

Karma: +6/-1
Offline Offline

Posts: 42



« on: June 25, 2015, 10:28:50 AM »

Hi , i have a bosch me 7.5.5 .... i used galletto 1260 to get the ecu bin , and use winosl to get the info .
The problem is that when i create the maps in tunerpro using this addresses :
Code:
MAP FOUND: KFZWOP 11x16 @ 0x11557
MAP FOUND: KFZWOP2 11x16 @ 0x11607
MAP FOUND: KFZW 12x16 @ 0x120DD
MAP FOUND: KFZW2 12x16 @ 0x1219D
MAP FOUND: KFMIRL 16x16 @ 0x150CA
MAP FOUND: KFMIOP 11x16 @ 0x16616
MAP FOUND: KFLBTS 16x12 @ 0x192A6
MAP FOUND: LAMFA 6x15 @ 0x1C98A
MAP FOUND: KFLDIMX 8x16 @ 0x1E200
MAP FOUND: KFLDHBN 8x8 @ 0x1E8F2
MAP FOUND: KFDLULS 8x8 @ 0x1EB93
MAP FOUND: KFLDRL 10x16 @ 0x1E352
MAP FOUND: LDRXN 16x1 @ 0x1EAD4
MAP FOUND: LDRXNZK 16x1 @ 0x1EB16
MAP FOUND: VMAXNB 1x1 @ 0x1F49A
MAP FOUND: VMAXTM 5x1 @ 0x1F4A8
MAP FOUND: VNMX 1x1 @ 0x116C8
MAP FOUND: NMAXDVG 1x8 @ 0x1F478
MAP FOUND: NMAXGA 1x8 @ 0x1F488
MAP FOUND: NMAX 1x1 @ 0x1679A
MAP FOUND: NMAXDV 1x1 @ 0x1679C
MAP FOUND: NMAXOG 1x1 @ 0x167A2
MAP FOUND: DNMAXH 1x1 @ 0x16794
MAP FOUND: ITNMXH 1x1 @ 0x16798
MAP FOUND: TMOTNMX 1x1 @ 0x1F498
MAP FOUND: TNMXH 1x1 @ 0x167A6
MAP FOUND: CWDLSAHK 1x1 @ 0x186F7
MAP FOUND: CDKAT 1x1 @ 0x181A3
MAP FOUND: CDHSH 1x1 @ 0x1819E
MAP FOUND: CDHSHE 1x1 @ 0x1819F
MAP FOUND: CDHSHE 1x1 @ 0x1819F
MAP FOUND: CDLSH 1x1 @ 0x181AB
MAP FOUND: CDSLS 1x1 @ 0x181B0
MAP FOUND: CLAHSH 1x1 @ 0x10751
MAP FOUND: CLAHSH2 1x1 @ 0x10752
MAP FOUND: CLAHSH2 1x1 @ 0x10752
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLASLPE 1x1 @ 0x10786
MAP FOUND: CLASLVE 1x1 @ 0x10789
MAP FOUND: CLASLVE 1x1 @ 0x1078C
MAP FOUND: KRKTE 1x1 @ 0x1C830

(http://nefariousmotorsports.com/forum/index.php?topic=4876.0;wap2)
or even the .dam files for this specific ecu still some of the maps look completely wrong.
Does somebody know whats going on ..... are the addresses wrong or do i have to make some calculations to the cell value ??
It's my first time playing with ecu files ,, so i would be very thankful for your help.

PS. because i wasn't able to make OLS521.dll work with ols i am using notepad to view the .dam files (witch is kinda noob-ish )
      I will attach the files i am using ..... if there is something wrong with them ?

PSS. i have damos superpack ( 2 600 files ) and most of the winols DLL files ... so if someone needs them just PM me Smiley
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #1 on: June 25, 2015, 09:12:32 PM »

Some maps in ME7 are 16 bit, some are 8 bit. It seems that one you posted is 16 bit and you set it as 8 bit...
Logged
dope40
Jr. Member
**

Karma: +6/-1
Offline Offline

Posts: 42



« Reply #2 on: June 26, 2015, 10:55:49 AM »

When i set it at 16 bits  it get even more ridiculous .... and also how should i know if its 8 or 16 bit ?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: June 28, 2015, 11:41:16 PM »

When i set it at 16 bits  it get even more ridiculous .... and also how should i know if its 8 or 16 bit ?

When every other byte doesn't change much (top 8 bits), its generally a 16 bit map.

ME7.5.5 is little endian, so that means the bytes on even addresses.

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)