Pages: [1]
Author Topic: Hello from sunny Wales!  (Read 3034 times)
Storm Chaser
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: June 29, 2015, 08:59:13 AM »

Hello guys, I'm a bit new to the factory ECU remapping bits and pieces but I have a CMD master and WinOls so I am hopefully going to learn a lot from you guys as I don't have a massive clue where to start!!
Logged
eibxmatic
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 39


« Reply #1 on: June 29, 2015, 03:30:29 PM »

S4 wiki with The funktionsrahmen Document and there is somewhere a 1.8tbam guide is a good first read in. After getting to know a lot of the topics comparing the damos. If u understand the tables and their effect start from scratch and try it on your own in small steps. Also the community project discussions should help a lot.
Logged
spacey3
Full Member
***

Karma: +12/-1
Offline Offline

Posts: 198


« Reply #2 on: June 30, 2015, 01:21:36 AM »

Nice to see a fellow Walian! Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)