Pages: [1] 2 3 ... 5
Author Topic: The 11 maps that I would like to know ! ! !  (Read 39896 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« on: July 01, 2015, 09:32:13 PM »

Hi!

My problem at the moment is discovery the map names!

The Car its a VW Passat V6 4motion 2004 ME7.1

I know just one, KRKTE!

I need to know the address of Idle ignition timing, partial ignition timing, wot ignition timing.

and for fuel, i need the address of TVUB, TEMIN, TLST.0 / TLST.1.

I take some pictures of some maps that i found, it on a red circle! I would like to know the names!
MAP 01

MAP 02

MAP 03

MAP 04

MAP 05

MAP 06

MAP 07

MAP 08 16bits

MAP 09 16bits

MAP 10

MAP 11


Help me please!!!!!

Dont exists DAMOS file for my ECU (engine BBG)

Smiley
« Last Edit: July 01, 2015, 09:36:28 PM by Gulfstream » Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #1 on: July 01, 2015, 09:51:09 PM »

1) please don't clutter the forums with posts in the wrong section
2) it is unlikely anybody can identify those maps by just looking at your screen shots.
3) how do you know those maps are important if you don't know what they are? There are thousands of other maps.

At least for the 2d maps you could get a screen shot of them in 2d Tongue
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #2 on: July 01, 2015, 10:01:52 PM »

1) please don't clutter the forums with posts in the wrong section
2) it is unlikely anybody can identify those maps by just looking at your screen shots.
3) how do you know those maps are important if you don't know what they are? There are thousands of other maps.

At least for the 2d maps you could get a screen shot of them in 2d Tongue

For that i need, that is run with E100, i need to know the address of that i say before the pictures! The pictures, i post just for any body that recognize the maps say you name!

And the question "I need to know the address of Idle ignition timing, partial ignition timing, wot ignition timing.

and for fuel, i need the address of TVUB, TEMIN, TLST.0 / TLST.1"

dont is noob question!

Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #3 on: July 01, 2015, 11:46:04 PM »

This map is call SQRTIN_ONU its used for LOAD application.
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #4 on: July 02, 2015, 12:57:31 AM »

That is a mighty flacid member you have there, sir.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #5 on: July 02, 2015, 02:29:31 AM »

Had you posted addresses, I would have done them all. From looking they appear to be:

3 kfzwop 1/2
9 MLHFM
8 KLAF
11 DZWETA

Have fun.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #6 on: July 02, 2015, 10:28:22 AM »

Had you posted addresses, I would have done them all. From looking they appear to be:

3 kfzwop 1/2
9 MLHFM
8 KLAF
11 DZWETA

Have fun.

One more time, ddillenger you are great! Always help me!

Every map that i know the name make learn more!

DZWETA and kfzwop

http://www.nefariousmotorsports.com/forum/index.php?topic=651.0

http://www.nefariousmotorsports.com/wiki/index.php/MDZW_1.120_(Calculating_Torque_at_the_Desired_Ignition_Angle)

1 minute after i read the name i found here in nefmoto the explanation!

My method of learn is different! I know how the engine works, but i dont know the map address and her name!

Know the name and the address i can read and read more and learn! Here in Nefmoto have alll information that i need, but i just know what i need to search (map names)

Smiley

Thanks!
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #7 on: July 02, 2015, 10:38:36 AM »

The Map 05, its like a ignition timing on idle, and the MAP 07, its like a ignition on wot.

I dont have certainty of this, but the maps are equal of the maps in ME3.8.2 (Passat 1.8 20v asp)
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #8 on: July 03, 2015, 06:15:05 PM »

Had you posted addresses, I would have done them all. From looking they appear to be:

3 kfzwop 1/2
9 MLHFM
8 KLAF
11 DZWETA

Have fun.

the map 10 is kfzw 1/2?

Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #9 on: July 05, 2015, 12:18:40 PM »



This map is the KFZW?

whats the map name in green and yellow circle?

Have 5 days that i works in E100, perfect! and so much power!

I change just the KRKTE, KFZW.

thanks!

Smiley
« Last Edit: July 05, 2015, 12:22:52 PM by Gulfstream » Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #10 on: July 05, 2015, 02:45:03 PM »

I found a post with a A3 file that help me to found any maps, they are so near in same files!

KFZWOP 11x16 @ 0x11557
KFZWOP2 11x16 @ 0x11607
KFZW 12x16 @ 0120DD
KFZW2 12x16 @ 01219D
KFMIRL 16x16 @ 0150CA
KFMIOP 11x16 @ 0x16616
KFLBTS 16x12 @ 0x192A6
LAMFA 6x15 @ 01C98A
KFLDIMX 8x16 @ 0x1E200
KFLDHBN 8x8 @ 0x1E8F2
KFDLULS 8x8 @ 0x1EB93
KFLDRL 10x16 @ 0x1E352
LDRXN 16x1 @ 0x1EAD4
LDRXNZK 16x1 @ 0x1EB16
VMAXNB 1x1 @ 01F49A
VMAXTM 5x1 @ 01F4A8
VNMX 1x1 @ 0116C8
NMAXDVG 1x8 @ 01F478
NMAXGA 1x8 @ 01F488
NMAX 1x1 @ 01679A
NMAXDV 1x1 @ 0x1679C
NMAXOG 1x1 @ 0x167A2
DNMAXH 1x1 @ 0x16794
ITNMXH 1x1 @ 0x16798
TMOTNMX 1x1 @ 0x1F498
TNMXH 1x1 @ 0x167A6
CWDLSAHK 1x1 @ 0x186F7
CDKAT 1x1 @ 0x181A3
CDHSH 1x1 @ 0x1819E
CDHSHE 1x1 @ 0x1819F
CDHSHE 1x1 @ 0x1819F
CDLSH 1x1 @ 0x181AB
CDSLS 1x1 @ 0x181B0
CLAHSH 1x1 @ 0x10751
CLAHSH2 1x1 @ 0x10752
CLAHSH2 1x1 @ 0x10752
CLAHSHE 1x1 @ 0x10753
CLAHSHE 1x1 @ 0x10753
CLAHSHE 1x1 @ 0x10753
CLASLPE 1x1 @ 0x10786
CLASLVE 1x1 @ 0x10789
CLASLVE 1x1 @ 0x1078C
KRKTE 1x1 @ 01C830

Just lack i found the TENIM!

The car is so good working with E100, but if i correct the TEMIN, works better when engine is cold!

Smiley
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #11 on: July 05, 2015, 02:58:38 PM »

For that AUM file (I suppose it is 06A906032FC as addresses seems familiar Cheesy ) TEMIN is 0x15454 and is followed by TEMINVA...
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #12 on: July 05, 2015, 04:12:51 PM »

For that AUM file (I suppose it is 06A906032FC as addresses seems familiar Cheesy ) TEMIN is 0x15454 and is followed by TEMINVA...

Thanks!!!!!

I found!!!


TENIM / TENIM(VA) - 0x154C8 / 0x154CA

In ME3.8.2, FGATO is 8 bits and TEMIN 16bits right?

In ME7, KRKTE is 8 bits and TEMIN 16 bits?

Smiley
« Last Edit: July 05, 2015, 04:39:24 PM by Gulfstream » Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #13 on: July 05, 2015, 05:22:38 PM »

AFAIK:
 - ME7: KRKTE is 8 bit, TEMIN(VA) is 16 bit.
 - M3.8.x: FGAT0 is 8 bit
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #14 on: July 05, 2015, 06:36:12 PM »

AFAIK:
 - ME7: KRKTE is 8 bit


This is rarely true. Most ME7 is 16bit for KRKTE Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1] 2 3 ... 5
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)