Pages: [1]
Author Topic: Diy ADS cable  (Read 5312 times)
dope40
Jr. Member
**

Karma: +6/-1
Offline Offline

Posts: 42



« on: July 02, 2015, 07:58:48 AM »

Hi, so recently i made ADS cable for a friend of mine ( for his BMW e36 318is ).... so i decided to post it here. The PCB is made in EAGLE but i also have it in Altium designer .
Hope it helps someone Smiley
Logged
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #1 on: July 02, 2015, 01:00:13 PM »

ads? I have a Bavarian cable, could this help anybody if I posted mprog read?
Logged
turboat
Hero Member
*****

Karma: +44/-3
Offline Offline

Posts: 619


« Reply #2 on: July 02, 2015, 11:32:42 PM »

I think its 'Advanced Diagnostic Service' or something. Works with the really crappy bmw diagnostics suite (Eidabs?) for early non-odb2 cars, I spent many an unhappy hour trying to get it to work for my m3 back in the day.

Thanks for posting up thou Dope, sure it'll be useful to someone.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)