Pages: [1]
Author Topic: 8e0 909 518- winols and me7sum differences  (Read 5800 times)
marchewa
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 53


« on: July 11, 2015, 11:04:02 AM »

Hi,

I'm writing to aks if it is normal that "checksums are waiting (74 checksums)" in Winols while me7sum shows "found 70 checksums in .bin".

Besides ME7Check found 1 error, but me7sum gives info: "*** DONE! 5/5 error(s) in .bin corrected..."


From the begining:

I've open stock .bin in Winols ("74 checksums waiting").

Then edited .bin in WinOLS without checksum errors, export it, but after reopening it there is an error in winols:



and next window with info about 73 not 74 checksums:



I flashed it to ecu (I know, idiot...) and after a few runs engine won't start. I read eeprom, removed death code, wrote it in eeprom back, and now I just want to be sure that .bin corrected in me7sum is safe and I can flash it.

That's why I'm asking about these differences between winols, me7check and me7sum.

I also added attachment with modified and checked file and ori. Will be grateful if someone could confirm that this file is good.

BTW. I am amazed at how many useful things I can find on this forum.

« Last Edit: July 11, 2015, 11:50:22 AM by marchewa » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)