Positive deviation limp and TDLDRA/NDLDRAPU/EDLDRP

Pages: [1]

« previous next »

Author

Topic: Positive deviation limp and TDLDRA/NDLDRAPU/EDLDRP (Read 23972 times)

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Positive deviation limp and TDLDRA/NDLDRAPU/EDLDRP « on: August 06, 2011, 06:36:42 PM »

I have a tune that is getting positive deviation limp when boost is ramping very slowly (WOT at low rpm)

It has a scaled MAF file (85mm), and a very restrictive stock intake.

According to the FR, the positive deviation diag is MinError here:

So according to this, to get positive deviation, you need

1) B_ldr (PID active) true
2) B_ldob false (assuming always true for S4, since KFLDRX0 is all zeros)
3) B_ladan true (rpm over 2600-3000, depending on ambient pressure)

4) rl_w (load) > SDLDRA (84.75)
5) lde > EDLDRP (100mbar)
6) ldimxak_w>=TVLDIMX (which doesn't exist in Mbox, but TVLDMX does, which i assume means WGDC>=95%)

7) all of the above true for > TDLDRA seconds (there are two TDLDRA's in Mbox, one is .65, the other is 1.5)

I am thinking the combination of slow ramp and scaled MAF is causing this to occur in my tune. Comments?


« Last Edit: July 31, 2012, 09:52:34 AM by nyet »	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Gonzo

Sr. Member

Karma: +21/-30
Offline

Offline

Posts: 483

	Re: Positive deviation limp and SDLDRA/EDLDRP « Reply #1 on: August 06, 2011, 09:06:10 PM »

Does it only happen in tall gears when you are lugging the engine?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and SDLDRA/EDLDRP « Reply #2 on: August 06, 2011, 10:02:52 PM »

Generally, yes, but I can make it happen in almost any gear except 1st by lugging it.


	Logged

s5fourdoor

Hero Member

Karma: +33/-3
Offline

Offline

Posts: 617

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #3 on: August 07, 2011, 11:16:03 PM »

why not just max out those settings? i bet it wouldn't take 10 seconds...


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #4 on: August 07, 2011, 11:27:03 PM »

Don't like disabling safety features w/o fully understanding them, in case I'm overlooking something important.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #5 on: August 08, 2011, 12:05:04 AM »

And to be specific, I have a bunch of old logs that SHOULD have triggered positive deviation (according to my understanding of dldr-dfpm-ldo) but did not. Makes me wonder if I understand positive deviation at all Sad


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #6 on: August 08, 2011, 11:55:34 AM »

Log of 3rd gear lug, and limp -> 10% wgdc


« Last Edit: August 08, 2011, 12:01:08 PM by nyet »	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #7 on: August 08, 2011, 05:18:44 PM »

Some interesting tidbits from the various bins that I have

R (a6 2.7t) is pu -240 to 280, rpm is 3000-2600
F (rs4) is 280 to -420 (inverted x axis!) rpm is 3000-3400 (K04s!!!!)
G (s4 2.7t) is pu -320 to 280, rpm is 3000-2520
M (s4 2.7t) is pu -420 to 280, rpm is 3000-2600

They're all 2x1 maps (so only two points, so just do simple interpolation to find output rpm)

The output is a single RPM value based on pu.... where pu is between 280 and -420

notice on the F box, the x axis (and output) is inverted, so the lower the pu, the higher the RPM threshold still.

Since this is a K04 tune, I am probably going to take the RS4 values.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #8 on: August 08, 2011, 05:29:52 PM »

also, it seems the R-Box TDLDRA is 3.0 vs 1.5 seconds
TLDLRA2 is the same for all the stock images I have (0.65) seconds


« Last Edit: August 08, 2011, 10:01:07 PM by nyet »	Logged

berTTos

Full Member

Karma: +24/-0
Offline

Offline

Posts: 91

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #9 on: August 09, 2011, 05:15:26 PM »

are you getting a positive deviation code?

actual never exceeds desired per your posted log - correct?

i've dealt with torque limit codes before related to MAF readings as well as boost deviation codes related to free flowing exhaust causing boost to ramp too quickly for stock boost diag.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and SDLDRA/NDLDRAPU/EDLDRP « Reply #10 on: August 09, 2011, 05:49:56 PM »

Quote from: berTTos on August 09, 2011, 05:15:26 PM

I reduced MAF scaling and bumped up NDLDRAPU and SDLDRA and the problem went away...


« Last Edit: August 09, 2011, 09:31:29 PM by nyet »	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and TDLDRA/NDLDRAPU/EDLDRP « Reply #11 on: July 31, 2012, 09:53:18 AM »

Update: on a another car I had to bump TDLDRA2


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Positive deviation limp and TDLDRA/NDLDRAPU/EDLDRP « Reply #12 on: January 05, 2015, 01:11:01 AM »


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 03:38:48 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search