NefMoto > ECU Files > Original ECU Files > Original ECU File Requests > 06A906032RP (0261208521) ECU
Pages: [1]
« previous next »
Author Topic: 06A906032RP (0261208521) ECU  (Read 9486 times)
.
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 29
« on: July 25, 2015, 12:06:53 AM »
hello,can you help me? i need a 06A906032RP (0261208521) ECU from a Ibiza Cupra full backup . i want try this software in my fr 150hp engine.i try write a 29f800 cupra read,but the car not starts.i think i need full backup in bootmode,and install my inmmo code.thanks Wink
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #1 on: July 25, 2015, 01:42:24 AM »
Next time start a new thread, don't spam an unrelated one from years before.

Original ECU files are in a section called 'Original ECU Files': http://nefariousmotorsports.com/forum/index.php?board=17.0

you will probably find the one you need, if not Google is a thing. Failing that, put up a request for the ori in the subsection for requests.

You will probably not need to bootmode it, nef should write your car ok, give it a try. Immo should just work if you have it paired with an ecu/cluster/key atm, but if not eeprom will need writing in bootmode.

Nye - please can you split this off, it's prescence here offends me.
Logged
.
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 29
« Reply #2 on: July 27, 2015, 03:38:16 AM »
hello, i have maps for 180 cupra,but i think i need a  micro st10c167 read too.i dont find a full read of this ecu in the forum.thanks
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070
« Reply #3 on: July 27, 2015, 10:18:48 AM »
LOL good luck finding a ST10 micro read from your ECU
Logged
I have no logs because I have a boost gauge (makes things easier)
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #4 on: July 27, 2015, 11:06:18 AM »
Tried to Google, but what's a "micro" read? Is this slang for info from both the processor, and the flash?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #5 on: July 27, 2015, 01:08:42 PM »
Google "ST10Flasher" and I think you could find some stuff for it.
« Last Edit: July 27, 2015, 01:10:25 PM by eliotroyano » Logged
.
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 29
« Reply #6 on: July 28, 2015, 01:10:02 PM »
Hello, thanks for your response, my intention is transform my ecu, in cupra's 180 ecu.i have a 180 read of flash. I tried write in my ecu,but the car dont starts.i think i need full backup of 180 ecu for clomplete the work.
Logged
Apsik
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 24
« Reply #7 on: September 15, 2015, 04:11:42 AM »
Quote from: IamwhoIam on July 27, 2015, 10:18:48 AM
LOL good luck finding a ST10 micro read from your ECU
He is lucky, isn't he?


Quote from: furaziko on July 28, 2015, 01:10:02 PM
...i think i need full backup of 180 ecu for clomplete the work.
check this out http://nefariousmotorsports.com/forum/index.php?topic=9018.0title=
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070
« Reply #8 on: October 28, 2015, 08:43:22 AM »
032RP 1.8T does NOT have an ST10 CPU LOL
Logged
I have no logs because I have a boost gauge (makes things easier)
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 01:28:02 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)