I take it you don't really know what to do with this? Have you defined any of it yourself yet?
The file you posted is already heavily modified, just not very well in areas it seems, injection has to be modded as you are using 630cc's, but there would be no point in posting your oem bin as lot's has been/needs to be changed for FI.
If you're a noob and want to define it, here is what I suggest first of all; there are definition files on here for R32, VR6, 20vt, 551's etc, all ME7 and all share same maps/functions which you can line up with your own. There are differences with some like narrow vs wide band, short runner v's variable but you should be able to pick out a lot with them, if not all eventually.
Get the free winols demo, mod the colours to show differences, load up your file and one of the full def's from here, ctrl+2 to put them together and go through the def files to see what lines up and goes green. Once you get good you can just see that the other areas have another slight offset - i.e. you press the + - bit to line it up again - and define that bit.... that's exactly what I did with yours last night and got about 105 maps/functions defined in an hour or so! Use HxD/nefmoto/tunerpro to define what you found, export/test.....job's a good un!
A week or two, some emulation, testing etc and you could mod what you want on your ecu!
So............. using one of the proper R32 ones from here I saw;
Pic 1 - exhaust cam weighting factors are not in yours being inlet only vvt but you can see some bits in green are the same, point being if u use an ME7 def file from here some will be the same, some different. R32 used for example, also has a different volume of air to fill the cylinder than your 2.8ltr.
Pic 2 - You can see very, very slight differences, need to see if bits line up almost same, factors same etc in defining - trial and error really.
Pic 3 - Closing time on ur 630 map vs stock BFH. Same values straight across the board, not sure how <600rpm tuning then a jump to 2000rpm is going to help your idle/low end!........ methinks we're starting to see why it's not as you want it!
Other pics - areas which I defined/picked out which look right for you to test so should be some for you to define there, quick look against the BFH file I was using, not one i've defined though just good for map hunting I use if you wonder why the ig delta is undefined on it. In fact that file is from here and is why it is a good idea to go through any def files on here to check they are sorted correctly throughout! Difference between an anally retentive mofo and a butcher!
Some to be getting on with there at least mate!
