Pages: [1]
Author Topic: Quick checksum question  (Read 4464 times)
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« on: July 31, 2015, 07:32:04 AM »

Say i flash file without check summing or anti launch coding didn't code right. The car then doesn't start obviously, is there a way to still flash over obd2? I've heard to wait like 10 minutes then you can flash?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: July 31, 2015, 12:50:41 PM »

There may be, but I would plan on bootmode writing if that happens.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #2 on: July 31, 2015, 07:15:08 PM »

Ok, results are in. After waiting 10 minutes I was able to flash over obd2. This is after purposely not correcting checksums and writing two step and knowing code would fail to be coded correctly.
Logged
Dave87VRS
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #3 on: August 01, 2015, 10:35:25 AM »

On which vehicle
Logged
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #4 on: August 01, 2015, 11:13:26 AM »

I did this on a 05 b6 a4 1.8t with the 8e0 909 518ak ecu.
Logged
Chris1982
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 59


« Reply #5 on: August 01, 2015, 02:30:29 PM »

Disconnect your battery and wait for 10 minutes. Mostly it works...
Logged
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #6 on: August 02, 2015, 01:16:00 PM »

Good info to know. Thanks guys
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)