NefMoto > Technical > Tuning > Need help to disable DTC
Pages: [1]
« previous next »
Author Topic: Need help to disable DTC  (Read 4888 times)
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« on: August 09, 2015, 02:35:35 AM »
I ve tried to find the tables but without success.

Dont know what subcategory these are ocated in my damos?

CDLDP
CDTES
CLATEVE
CLALDPE

Audi TT 3.2 2007
Bosch Me7.1.1 G 40Mhz ST10 based ECU
BOx number: 022906032HJ

I need to Disable DTC´s for Rear O2 sensors 1 and 2 and I have deleted EVAP system. My LTFT is diabled Sad
Help is apriciated.
Logged
E85oholic
giles92
Full Member
***

Karma: +13/-3
Offline Offline

Posts: 83
« Reply #1 on: August 09, 2015, 05:14:38 AM »
its a long shot. But in my xdf its labeled under the category of BGTUMG: 720 Berechnete
Logged
giles92
Full Member
***

Karma: +13/-3
Offline Offline

Posts: 83
« Reply #2 on: August 09, 2015, 05:18:17 AM »
its a long shot. But in my xdf those scalars are labeled under the category of BGTUMG: 720 Berechnete grobe Umgebungstemperatur for CDLDP and cdtes. For CLATEVE and CLALDPE its under DFPM_DEKON.
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #3 on: August 09, 2015, 06:14:41 AM »
 BGTUMG OK! Im gonne check that out Smiley  Thanks.
Logged
E85oholic
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #4 on: August 09, 2015, 06:37:33 AM »
I Found them... I compared a damos file from anoter ECU but its har to find Scalars.. I got 88 search find on data that might match lol.. How do ppl find these scalars ?
Logged
E85oholic
giles92
Full Member
***

Karma: +13/-3
Offline Offline

Posts: 83
« Reply #5 on: August 09, 2015, 07:37:33 AM »
Usually they are in a series with many other scalars. the CDLDP and CDTES are a line or two apart in their address. In my ecu file they are located at 181A5 and 181B0 that isnt where yours will be, just an example. In front of and after these two are some other scalars for Catalysts, Sai and Egt sensors in my case. It goes from 18194 to 181B0. You may be able to look at the raw hex and see a sequence. It is easiest if you have a file and map pack for a similar ecu with these variables defined as well as the ones around it like CDKAT  and CDSLS. A similar ecu with similar hardware is likely to have the same sequence or similar even if the offset or hex address is different.
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #6 on: August 09, 2015, 09:15:18 AM »
YEs.. Problem is that my Me7.1.1 has no map pack Sad   I have to buy one i think.. Sad
Logged
E85oholic
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #7 on: August 09, 2015, 10:32:57 AM »
Quote from: Jim_Coupe on August 09, 2015, 09:15:18 AM
YEs.. Problem is that my Me7.1.1 has no map pack Sad   I have to buy one i think.. Sad

i have mk5 r32 st10 damos. pm me if interested.
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #8 on: August 09, 2015, 10:48:54 AM »
Alrigt ! U got PM
Logged
E85oholic
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 10:30:11 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0s, 0q)