Pages: [1]
Author Topic: Rb4 s4 cluster immo problem  (Read 2986 times)
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 661



« on: August 09, 2015, 04:27:56 PM »

So I'm installing new cluster and I've been following ross tech instructions to pair ecu and cluster. It say's immobilizer must be defeated in immo 3 vehicle. I try the 95040 tool and it says ecu not supported. The ecu is from a 2004 s4 4.2l. Is it possible to get around this? I have the pin
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: August 09, 2015, 04:43:44 PM »

Nowhere does it say the immobilizer must be defeated. You cannot adapt components with the immobilizer off.

Read the pin with one of the other 100's of programs capable. Vag K+commander will work.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)