Pages: [1]
Author Topic: Need healthy 150bhp 1.8t logs  (Read 9173 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: August 10, 2015, 12:59:47 PM »

Hello,
I really need a healthy ori (not remapped) mass air flow log (in grams/second) in third gear full pull. If anyone has any done before remapping then please share. thanks.
Logged

KmosK04
Full Member
***

Karma: +5/-10
Offline Offline

Posts: 97


« Reply #1 on: August 10, 2015, 02:30:31 PM »

Here you are. Audi TT AUM 150ps stock VCDS logs
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #2 on: August 11, 2015, 02:18:42 AM »

Here you are. Audi TT AUM 150ps stock VCDS logs

Thanks. Maybe someone has me7logger higher resolution logs 1000rpm to 7000rpm?
« Last Edit: August 11, 2015, 03:47:47 AM by masterj » Logged

masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #3 on: August 11, 2015, 03:47:23 AM »

Here you are. Audi TT AUM 150ps stock VCDS logs

BTW: is this really huge jump of air flow mass <3000rpm correct (26 to 68 g/s)? it is not consistent with all the other maf data.
Logged

MIL_on
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 119


« Reply #4 on: August 13, 2015, 10:31:59 PM »

There you go.
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #5 on: September 30, 2015, 06:53:11 AM »

There you go.

thank you very much Smiley
Logged

aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601


« Reply #6 on: November 07, 2016, 11:41:09 AM »

What should a mapped one do?
Have 145g/sec right now but car is old with k03 instead of k03s...

Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1455


mk4 1.8T AUM


« Reply #7 on: November 07, 2016, 09:59:17 PM »

What should a mapped one do?
Have 145g/sec right now but car is old with k03 instead of k03s...



~ 120 g/s stock 150hp
~ 140 g/s- 180hp
~~ 160 g/s- 200hp
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)