Hello everyone and thanks in advance for any help given.

I recently bought an Audi Allroad 2.7t 2001 model that had been sitting for a while with a flat battery, I replaced the battery and started it but the immobiliser light never stopped flashing and the car cut out after about a second.

For some unknown reason I cannot read the car via the OBD port with any software/cable that I have, I have however removed the ECU (4z7907551d) Bosch ME7.1 and read the 95040 chip using the software from this website.

Another complication is that the instrument cluster is faulty and I cannot read it either.

I have modified the 95040 binary file so i think that it will now not look for immobiliser but have not yet written it back to the ECU as checksums are not something that I understand despite having read lots about them.

Could someone please have a look at the files and help me correct the checksum ( that's if it needs correcting )

Many thanks.

Chris.

Anything you do on the page must be reflected in the checksum. Fixed file attached

No worries

Nice one don't be afraid to ask for help, we all have to learn. Note that checksums for the 95040 eeprom are very simple (although I still have to look it up every time), but the checksums for the flash are much more complicated, hence nyet's tool