NefMoto > Technical > Flashing and Chipping > Galletto boot mode issue
Pages: [1]
« previous next »
Author Topic: Galletto boot mode issue  (Read 5823 times)
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« on: August 19, 2015, 12:37:42 PM »
Hi, Havent been on here for a while but recently got my self into a pickle.

Basicly I flashed a map onto my ecu a friend (who does it as a job) made. And flashed all good. Not problem. but then went to start it and it starts for a second and dies. To me after having this before says. Immobilizer issue.

So got my Galletto out, (as have done a few times before to get it into boot mode and flash previous on but this time just comes up saying 'boot mode inactive'...

Any one can shed some light on this would be grateful!!
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #1 on: August 19, 2015, 12:56:49 PM »
your friend (who does it as a job) gave you the wrong file to flash?

sounds more like stolen tune and youre cluelessly flashing files wondering why it doesnt work.

good luck.
Logged
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #2 on: August 19, 2015, 01:06:07 PM »
Quote from: k0mpresd on August 19, 2015, 12:56:49 PM
your friend (who does it as a job) gave you the wrong file to flash?

sounds more like stolen tune and youre cluelessly flashing files wondering why it doesnt work.

good luck.

Have done flashed my own files and edited then successfully before. Also all of his previous maps have been fine.

If people are not going to try help then don't bother writing.... 
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #3 on: August 19, 2015, 03:14:51 PM »
the "help" you want should have been helping yourself to some knowledge before you and youre "friend with a job" went about just randomly flashing the, what i can only assume is, the blatantly wrong file.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #4 on: August 19, 2015, 03:36:12 PM »
It sounds like you flash an immo3 binary onto an immo2 ecu (Like using 032LP on 032DL). Post your ecu number, and the file number you flashed.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #5 on: August 23, 2015, 12:05:52 AM »
Quote from: ddillenger on August 19, 2015, 03:36:12 PM
It sounds like you flash an immo3 binary onto an immo2 ecu (Like using 032LP on 032DL). Post your ecu number, and the file number you flashed.

Hi, ok cool thanks!

File is attached, and my ecu number is 06a 906 032 dr benzin me7.5 0003
Logged
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #6 on: August 23, 2015, 12:28:02 AM »
Also has anyone used one of these? maybe i could deactive the immo via this?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #7 on: August 23, 2015, 11:01:41 PM »
As I figured. Your ecu is immo2, this binary is 032MJ, immo3. You need to disable the immobilizer in the flash, or more likely just write an immo3 eeprom to the ecu, then flash.

I assume the VIN and EXTRA fields read XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX with the new file?
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #8 on: September 02, 2015, 12:10:56 PM »
Quote from: ddillenger on August 23, 2015, 11:01:41 PM
As I figured. Your ecu is immo2, this binary is 032MJ, immo3. You need to disable the immobilizer in the flash, or more likely just write an immo3 eeprom to the ecu, then flash.

I assume the VIN and EXTRA fields read XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX with the new file?

Ok. Yes you are correct.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 04:22:20 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)