Hi,

I hope my english is understandable.

I want to make a theoretical consideration about needed changes in ME 7.5 maps when i would build my engine new.
Its an Audi engine and the possibilty stroker - cubic - conversion could be from 1781 ccm to 1998 (11% more) or 2051(14% more) ccm.
Without speaking about mechanical possibilities i want to know which maps really must be changed for that?
For the first exampel all other things from engine are the same.

I think the required changes could be KRKTE at first with a little be higher value (11 or 14%)? The next change I think could be little bit reduce of boost maps. The reason could be, that the turbo is the same in this exampel and the air mass is than also the same from the Turbo - but the engine have more cubic. So the turbo have less possible air mass at the same rpm than before. Is that right?

What other maps must be changed in THIS exampel?

Next exampel could be 1998ccm or 2051 ccm with bigger turbo, bigger injectors and so on - the normal package ;-). Then i would use ols300 the tuning.
But to understand what happens I would speak here about exampel one.

Thank you, you are right. Its more then only a little bit.

Thanks for this tip.