hello , please help me with some advice , after i flashed my ecu (audi b6 1.8T AVJ 110kw 8E0906018B) with a moded file maybe was a noncompatible file or for different type of engine (i drove the car and was acting pretty good in agressive driving style wast good driving in normal condition ) with nefmoto flash i get 2 faults on engine controler via
Vag-com 311.2-N :18014 -rough road/engine torque signal from ABS : electrical malfunction p16606 - 35-00
              18020 Engine control module incorectly coded p1612 - 35-00
so i decided to flash again my ECU with my original file i have backed up before flashing and now i get the same errors and my ESP/ABS and brake lights are on in dashboard , i got no abs or esp working

i enter with vag-com 311.2-N in ABS/ESP controller and i get 3 more errors:
18256 please check dtc memory of engine controller p1848 35-00
01044 control module incorectly coded
00778 steering angle g85 66-10 not matched -intermitent

please help me fix this ESP/ABS problems with my vag-com 311.2-N because this one i got registered after i bought the cable from ebay or give me some solutions to fix it . Thank you

hello! yes was a successfull flash cuz was 2nd atempt 1st failed and card didnt want to start anymore then i reflashed and worked , i deleted faults but the ones im asking about canot be deleted .thank you

Thanks for completing this, it might help someone later!