NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Check Engine Light self test issue b5s4
Pages: [1]
« previous next »
Author Topic: Check Engine Light self test issue b5s4  (Read 4443 times)
infinkc
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 94
« on: September 03, 2015, 09:00:00 AM »
I tried to search, but didnt come up with much.
I was helping a local with an issue he is having with his car trying to get it to pass CA smog.

The check engine light does not come on and go off when you first turn the ignition on, this is a requirement for CA smog.  I tried another ECU and the same issue, different cluster also.

The odd thing is the cel does come on for an engine fault, so it is active.

Any insight?
Logged
f up your ecu, i can help http://nefariousmotorsports.com/forum/index.php/topic,892.0title,.html
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: September 03, 2015, 05:31:30 PM »
Need to know the ecu number.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #2 on: September 04, 2015, 01:48:13 AM »
I remember this being a problem in another thread from ages ago.  I'll have a Google.

Can't remember the coding issue - sure a CW is different in the file.
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: September 04, 2015, 03:20:21 AM »
CWNOMIL, but that's not the issue here unless he's using some obscure euro variant.

Any chance it's an A6 engine harness?
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
infinkc
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 94
« Reply #4 on: September 11, 2015, 09:18:19 PM »
Quote from: ddillenger on September 04, 2015, 03:20:21 AM
CWNOMIL, but that's not the issue here unless he's using some obscure euro variant.

Any chance it's an A6 engine harness?

its an M box ecu, and it must be an a6 harness someone swapped in, cause i couldnt plug in the spare ecu as the tab was not correct going into the ecu.
Logged
f up your ecu, i can help http://nefariousmotorsports.com/forum/index.php/topic,892.0title,.html
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: September 12, 2015, 08:57:43 AM »
Quote from: infinkc on September 11, 2015, 09:18:19 PM
its an M box ecu, and it must be an a6 harness someone swapped in, cause i couldnt plug in the spare ecu as the tab was not correct going into the ecu.

Then it's a single wire causing your issue.

orange connector
pin 10 blue/lilac
it's on the black connector on the A6 harness
Move it to the orange connector (pin to match).
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 03:40:29 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)