Pages: [1]
Author Topic: 2.7t A6/allroad: P2181 - Performance Malfunction in Cooling System  (Read 6017 times)
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12271


WWW

http://wiki.ross-tech.com/wiki/index.php/18613/P2181/008577

Anybody know anything about DTHM?

Safe to zero out CWDTHM?

Seeing this on some cars even with brand new thermostats/temp sensors etc.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: September 05, 2015, 07:17:20 PM »

Been fixing VW's and Audi's for 13+ years. Never had a problem resolving this fault without software mods.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12271


WWW
« Reply #2 on: September 05, 2015, 07:19:10 PM »

Been fixing VW's and Audi's for 13+ years. Never had a problem resolving this fault without software mods.

Radiator issue? What else can go wrong if all temp sensors are brand new?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #3 on: September 05, 2015, 07:23:22 PM »

I've seen it be the water pump a few times from low timing belt tension. You probably know this, but this code gets thrown if the car warms up to fast, too slow, or does not maintain it's warm-up temp well. Fans could be a problem, as well as the radiator fan switch.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12271


WWW
« Reply #4 on: September 05, 2015, 07:29:00 PM »

I've seen it be the water pump a few times from low timing belt tension. You probably know this, but this code gets thrown if the car warms up to fast, too slow, or does not maintain it's warm-up temp well. Fans could be a problem, as well as the radiator fan switch.

Everything was swapped for these cars, including water pump. Fans are fine. Only thing that remains is the rad. Two diff cars. They don't overheat and they both warm up fine.

Is it possible the coolant temp model isn't quite right for aging cars, and the error threshold (5C iirc) is too narrow?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12271


WWW
« Reply #5 on: September 05, 2015, 07:44:12 PM »

From the ME7.1 FR, it looks like it should only trigger if the motor warms up too slow... (thmdmm-tmotlin>5C)

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #6 on: September 05, 2015, 07:54:32 PM »

From the ME7.1 FR, it looks like it should only trigger if the motor warms up too slow... (thmdmm-tmotlin>5C)

This the most common scenario. Have you logged the warm-up cycle?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #7 on: September 06, 2015, 05:57:18 AM »

check coolant temperature with vag-com on engine and instruments.

I had this problem and on instruments temperature climb till 90º and stay there, on engine it stops at 80º.

It was a new coolant temperature sensor that fail after 1 month.
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #8 on: September 07, 2015, 10:04:00 AM »

Are they both genuine thermostats and genuine temp sensors? I've had issues with aftermarket versions of both.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)