NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Removing old tune
Pages: [1]
« previous next »
Author Topic: Removing old tune  (Read 5738 times)
Michaelblankenship17
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« on: September 08, 2015, 11:01:27 PM »
Hey guys! I have an amd tune on an Abox b5 s4 and was wondering how I could go about removing the tune? Usually I could just flash over an old tune but the Ecu is locked and I can't communicate with it! I know this is probably a noob question but maybe I need a nudge in the right direction!
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: September 08, 2015, 11:07:20 PM »
Desolder the chip, replace with blank.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Michaelblankenship17
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #2 on: September 08, 2015, 11:37:31 PM »
Is there no way to flash over the old tune?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: September 08, 2015, 11:39:22 PM »
If it isn't socketed, and it is refusing the write commands, no.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Michaelblankenship17
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #4 on: September 09, 2015, 12:08:28 AM »
How do I go about getting a new chip to flash?
Logged
Michaelblankenship17
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #5 on: September 09, 2015, 12:19:34 AM »
Maybe I'm understanding it wrong as well, couldn't I start in boot mode and flash over it?
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #6 on: September 09, 2015, 02:43:06 AM »
Quote from: Michaelblankenship17 on September 09, 2015, 12:19:34 AM
Maybe I'm understanding it wrong as well, couldn't I start in boot mode and flash over it?

Sure you can.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #7 on: September 09, 2015, 09:47:37 AM »
Quote from: Michaelblankenship17 on September 09, 2015, 12:19:34 AM
Maybe I'm understanding it wrong as well, couldn't I start in boot mode and flash over it?

Sorry, yes, assuming it isn't socketed.

If it IS socketed, you'll have to desolder the socket and replace with a blank flash.

Not sure my post was clear on that.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Michaelblankenship17
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #8 on: September 09, 2015, 11:02:20 AM »
I took the Ecu Apart and could not find any chip, will attempt boot mode.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 08:03:40 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)