Pages: [1] 2
Author Topic: !!! Transmission Swap Coding !!!  (Read 13722 times)
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« on: September 14, 2015, 06:01:24 AM »

Hi friends, I need some help. I have been helping to do a tranny swap coding for an MK4 VW Bora with 1.8T engine without luck. It is an Euro version of same american 1.8T Jetta. Car receive a auto to manual 5sped tranny swap. Mechanically speaking everything is working properlly, speedo, reverse lights, starter, etc... Only DTCs are ECU, ABS, Cluster, etc.... looking for TCU.

ECU HW SW codes are 06A906032SL 0261208529 371155 with Coding: 07550. I try to recode it to 07500 but ECU does not accept it, leaving the original code 07550.

Then I have two doubts:
1.- Do I need to do login before recode it?
2.- I know that there several ECUs that can not accept a tranny change recode, how do I know if this one can accept or be capable to be recoded?
3.- If it was not possible which would be the best software version can I install in it ECU for proper OEM functionality?

Thanks a lot for great help as usual.
« Last Edit: September 16, 2015, 04:46:40 AM by eliotroyano » Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #1 on: September 14, 2015, 06:04:41 AM »

I forgot to add OEM flash dump of ECU.
Thanks,
Eliot
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #2 on: September 14, 2015, 07:01:09 AM »

that software will only accept 07550 as coding.
Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #3 on: September 14, 2015, 07:05:12 AM »

that software will only accept 07550 as coding.

Thanks for the reply, but how can I learn to know it?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #4 on: September 14, 2015, 09:02:47 AM »

I believe you need to flash a manual transmission file.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #5 on: September 14, 2015, 09:13:36 AM »

No mk4 software is recodable auto to manual or vice versa. Your file will accept coding variants 07450 and 07550.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #6 on: September 14, 2015, 12:17:39 PM »

No mk4 software is recodable auto to manual or vice versa. Your file will accept coding variants 07450 and 07550.

Thanks DD here a view of it diagnosis:
Address 01     -------------------------------------------------------
   Controller: 06A 906 032 SL
   Component: 1.8L R4/5VT         0030
   Coding: 07550
   Shop #: WSC 00001
   xxxxxxxxxxxxxxxx     xxxxxxxxxxxxxxxxxxx
Looking more info about car I found that is a american version with 1.8T AWP engine. Sorry about info that I post in first comment. Look at pic attached. Then which manual tranny SW version do you recommend it to use in ECU? if it could be compatible with OEM serial eeprom dump will be really useful too.

« Last Edit: September 14, 2015, 12:19:11 PM by eliotroyano » Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #7 on: September 15, 2015, 05:26:44 AM »

Friends I have been searching and I know that in flash dump exists different versions of same maps used for different conditions, like this case. Also I know the ECU coding is located in serial eeprom, but I will like to know how can I notice if a flash eeprom software in ECU is for a manual / automatic / tiptronic transmission and if can accept a tranny swap coding.
Some help will be really useful.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #8 on: September 15, 2015, 12:06:46 PM »

Friends I have been searching and I know that in flash dump exists different versions of same maps used for different conditions, like this case. Also I know the ECU coding is located in serial eeprom, but I will like to know how can I notice if a flash eeprom software in ECU is for a manual / automatic / tiptronic transmission and if can accept a tranny swap coding.
Some help will be really useful.

I once tried to do what you are trying to do. ECU would not accept coding change using VCDS. Manually edited the e2p, then got codes for incorrect coding, even though coding was correct. Is there some reason you can't just flash a manual file to this car? If the auto file is tuned, just move the changes into the manual file.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #9 on: September 15, 2015, 12:14:13 PM »

I once tried to do what you are trying to do. ECU would not accept coding change using VCDS. Manually edited the e2p, then got codes for incorrect coding, even though coding was correct. Is there some reason you can't just flash a manual file to this car? If the auto file is tuned, just move the changes into the manual file.

I will like to recognize if a file is for a manual or auto tranny. There is no tuned file, it is just a MK4 VW Jetta 1.8T AWP engine with 5speed manual tranny swap. Which flash dump (of manual tranny car) could be compatible with serial eeprom that car already use?
« Last Edit: September 15, 2015, 12:16:23 PM by eliotroyano » Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #10 on: September 15, 2015, 12:34:09 PM »

After checking in ETKA - 06A906032SK - it's from AWP manual transmisson
Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #11 on: September 15, 2015, 12:38:27 PM »

After checking in ETKA - 06A906032SK - it's from AWP manual transmisson
Thanks for your advice but seems to me that it is for a 1.8T AWV 150HP car.
« Last Edit: September 16, 2015, 04:51:37 AM by eliotroyano » Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #12 on: September 15, 2015, 06:48:26 PM »

Other options could be 032SM or 032SJ.
« Last Edit: September 16, 2015, 04:51:15 AM by eliotroyano » Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #13 on: September 15, 2015, 07:29:41 PM »

 Huh
« Last Edit: September 16, 2015, 04:51:24 AM by eliotroyano » Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #14 on: September 15, 2015, 07:54:30 PM »

reminds me of a woman.
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)