Adam,
Thanks for the response. Hope my lack of understanding of the things you know so well is not too annoying.
I think once I get the basics down I will be OK but its frustrating being an ignorant newbie.
Regarding "8N0906018BB; This is not a part number..."
My ride is a 2003 Mk1TT 225.
ENGINE CODE: BEA
WITH EGT SENSOR
I found that number scanning the ECU, info below, using NefMoto, then did a search in ECU files and found this post with .bin file:
http://nefariousmotorsports.com/forum/index.php?topic=4370.0Also see that number printed prominently on photos of ecu labels on Ebay as "8N0 906 028 **" where ** is one or two letters.
When I search ECU Definition Files, there is no exact match but if I search and leave off the last two letters, there are bunches of them.
My buddies at Griffin Motorwerke (where we built the car up to Stage 3+), tell me Audi only used EGT on my year/model, so I'm thinking the files with letter other than BB suffix may not support EGT. What do you think?
Here is the full ECU info:
0x94:
Hardware No.
0261207774
Software No.
1037367515
0x91 Manuf. ECU Hardware no.:
0x98, 0xFF
0x9B Calibration Date:
8N0906018BB, 0005, 0x00001E1E, 0x00000000, 0x0A45, 1.8L R4/5VT, G01
