Pages: [1]
Author Topic: LDRXN and Boost Pressure Spec  (Read 3865 times)
Tatan974
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 19


« on: September 23, 2015, 10:38:50 PM »

Hello, i need your help for understand the boost pressure spec in the me7.5. I moded the LDRXN to 140%, so the boost pressure should be to 1700mbar (140*10+300) but when i logging to vcds, in channel 115 the boost pressure is 1950mbar at 2700rpm and 1800mbar at 5000 rpm. It's normal ?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #1 on: September 23, 2015, 10:45:08 PM »

Did you bother reading this?

http://s4wiki.com/wiki/Tuning#rlsol_to_plsol_calculation
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)