Pages: [1]
Author Topic: adaptation fail fuel pump vcds  (Read 3789 times)
carladams
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: September 27, 2015, 12:58:53 PM »

Hello I have recently been forced to change the cluster and engine  ECU in my 2005 2.5tdi cabriolet , The replacements came from the same car model even same month of manufacture and all part numbers matched. The keys etc have now been matched and the pin obtained from the ECU The immobilizer status according to VCDS is showing good . The situation is complicated as these cars have an additional immobilizer in the Fuel injection Pump . I have  fitted a rebuilt pump with new control module. Using  the Ross-tech instructions for coding injection  pump immobilizer 111 using channel 50  everything goes as per the instructions login pin correct etc but for some reason when i try to code the pump with the pin it comes up adaptation fail. Any help or guidance  much appreciated. Thanks
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.01 seconds with 15 queries. (Pretty URLs adds 0s, 0q)