Pages: [1]
Author Topic: requested lambda doesn't follow lamfa  (Read 4608 times)
Giannis
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 176


« on: August 20, 2011, 01:50:54 AM »

Hello to all i was experimenting in my mafless tune and i while i was doing some logs last night i noticed that requested lambda doesn'n follow lamfa in part throtle conditions but only in WOT. Has anyone any ideas what is happening?
Logged
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« Reply #1 on: August 20, 2011, 02:23:52 AM »

I just double checked the FR and LAMFA is for full load enrichment  "when the driver calls for maximum torque over mrfa_w." pg 1025
Logged

I have a b5 s4
but i just want to dance.
Giannis
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 176


« Reply #2 on: August 20, 2011, 04:30:51 AM »

yes you are right but i think that one axis of lamfa if torque request from KFPED and the other axis is RPM it has no meaning if LAMFA was only for WOT fuelling to has other axis for torque. Correct me if i am wrong. I am trying to enrich my fuel in high load but not WOT conditions. Is there any other way?
Logged
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« Reply #3 on: August 23, 2011, 10:23:24 PM »

The bts maps work, not sure about mafless though.
Kflbts Is the ticket.
I'll have to check the fr to see what other inputs affect bts.
Logged

I have a b5 s4
but i just want to dance.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 16 queries. (Pretty URLs adds 0s, 0q)