Pages: [1]
Author Topic: Re: 4B0906018CG 360100 basic map pack  (Read 5489 times)
dimon_707
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 5


« on: October 28, 2015, 02:17:25 PM »

Hello!
I would like to stitch the car under euro 2 with removal of the catalyst. You can send me the same file with addresses of cards which need to be corrected?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #1 on: October 28, 2015, 07:02:04 PM »

Please at least try to post in the right forum.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179


« Reply #2 on: October 29, 2015, 02:40:01 AM »

You can send me the same file with addresses of cards which need to be corrected?

Why don't you upload your file, and we'll help.  Not only that, the Wiki tells you EVERY single map you need to change to remove secondary O2.  Why don't you have a go at helping yourself, and we'll verify.
Logged
dimon_707
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 5


« Reply #3 on: October 31, 2015, 06:17:08 AM »

I disconnected O2, control of the catalyst and SAI. Whether check please everything I correctly made.
Logged
dimon_707
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 5


« Reply #4 on: November 01, 2015, 11:12:03 AM »

Here my last project, disconnected the second lambda, control of the catalyst and SAI. Only I can't understand what figure to put 5 or 73 in CLRHK and what to put in CWLAMBTS? Help to resolve an issue.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)