Pages: 1 ... 4 5 [6]
Author Topic: Big Turbo 1.8T help  (Read 44253 times)
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 661



« Reply #75 on: May 19, 2016, 11:55:10 AM »

Type in search bar 032hs map pack. The first two topics have a huge xdf. Open the xdf in tuner pro. Start a new tuner pro Constance. It's an option somewhere in the top tabs. Now open your file and xdf in the second tuner pro window. Go back to the 032hs xdf and find the map you're looking for. Right click it and select the copy button. Now paste the copied map into your xdf.
Now transfer the map addresses into the new xdf we just created. Now your map should look correct if any of this made sense
Logged
Jonamond
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 82



« Reply #76 on: May 19, 2016, 12:06:09 PM »

I'll give it a shot thanks again
Logged
A4Rich
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 116


« Reply #77 on: May 21, 2016, 01:40:43 PM »

Attached is an updated XDF based on the KP KTM753 posted.  I added KFMLDMX and revised KFWDKMSN. 

Also I had a question about KFMLDMX (see pic), it looks strange in the HEX and compared to other ecu definitions (8x8 instead of 8x9).  Are we sure this is correct?
Logged
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 661



« Reply #78 on: May 21, 2016, 04:06:08 PM »

I'll check it when I get home, possibly my definition file is off?
Logged
Pages: 1 ... 4 5 [6]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)