Let's start with the Basics... KRKTE

Pages: 1 2 [3]

« previous next »

Author

Topic: Let's start with the Basics... KRKTE (Read 40761 times)

pablo53

Full Member

Karma: +5/-1
Offline

Offline

Posts: 94

	Re: Let's start with the Basics... KRKTE « Reply #30 on: September 26, 2013, 04:47:53 PM »

TVUB should change, too, it will injector lag will increase with increase in pressure.


	Logged

dantt

Full Member

Karma: +0/-1
Offline

Offline

Posts: 148

	Re: Let's start with the Basics... KRKTE « Reply #31 on: September 26, 2013, 11:40:59 PM »

thanks a lot,
I probably need to look for a new flow converter.
from 3 @ 4 bar the expected decrease is 15% but I get only 12%.

if I confirm that my calculation is right i'll multiply by 12% KVB and TVUB


	Logged

dantt

Full Member

Karma: +0/-1
Offline

Offline

Posts: 148

	Re: Let's start with the Basics... KRKTE « Reply #32 on: September 26, 2013, 11:59:59 PM »

i use this flow converter http://witchhunter.com/injectorcalc1.php
can you suggest another one?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Let's start with the Basics... KRKTE « Reply #33 on: September 27, 2013, 12:03:23 AM »

Quote from: dantt on September 26, 2013, 11:40:59 PM

Do not multiply TVUB by 12 percent.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

dantt

Full Member

Karma: +0/-1
Offline

Offline

Posts: 148

	Re: Let's start with the Basics... KRKTE « Reply #34 on: September 27, 2013, 12:23:49 AM »

this xls return the same result
https://www.google.it/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0CFAQFjAE&url=http%3A%2F%2Fwww.dtec.net.au%2FTech%2520Articles%2FInjector%2520Data%2520%26%2520Flow%2520Converter.xls&ei=SzFFUqf0HKP_4QTQjYGoDA&usg=AFQjCNHT8xUq_o_DYS8NOTpm_McJ_EndCA&bvm=bv.53217764,d.bGE&cad=rja

probabli 386 cc @3bar are 455cc @ 4bar


	Logged

dantt

Full Member

Karma: +0/-1
Offline

Offline

Posts: 148

	Re: Let's start with the Basics... KRKTE « Reply #35 on: September 27, 2013, 12:33:35 AM »

Quote from: ddillenger on September 27, 2013, 12:03:23 AM

Do not multiply TVUB by 12 percent.

thanks i'll study tvub increment better


	Logged

dantt

Full Member

Karma: +0/-1
Offline

Offline

Posts: 148

	Re: Let's start with the Basics... KRKTE « Reply #36 on: September 27, 2013, 01:21:34 AM »

in according with this post
http://nefariousmotorsports.com/forum/index.php?topic=320.msg18426;topicseen#msg18426
probably i must divide by 1.1852 tvub value

i must verify if this http://www.boschdealer.com/specsheets/0280158117cs.jpg is valid for tt 225 injector ( i think is it )


	Logged

dantt

Full Member

Karma: +0/-1
Offline

Offline

Posts: 148

	Re: Let's start with the Basics... KRKTE « Reply #37 on: September 27, 2013, 06:26:02 AM »

Quote from: dantt on September 27, 2013, 01:21:34 AM

in according with this post
http://nefariousmotorsports.com/forum/index.php?topic=320.msg18426;topicseen#msg18426
probably i must divide by 1.1852 tvub value

i must verify if this http://www.boschdealer.com/specsheets/0280158117cs.jpg is valid for tt 225 injector ( i think is it )

no i think is not corerct Sad


	Logged

Pages: 1 2 [3]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 10:46:42 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search