Pages: [1]
Author Topic: Reflash Tuned File from 06A906032HA to 06A906032QJ ?  (Read 6435 times)
chienliu1972
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 50


« on: August 29, 2011, 06:44:46 PM »

2003 Sharan 1.8T AWC is fitted with "06A 906 032 HA" ECU. From ETKA, I find ECU "06A 906 032 QJ" may be fitted on Sharan 1.8T AWC engine, too. Could I relash the ABT tuned file from "HA" to "QJ" ECU? Due to these two ECUs could be both fitted on Sharan 1.8T AWC.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #1 on: August 29, 2011, 09:09:07 PM »

The part numbers are similar enough that it may work. But if it doesn't work, you will likely have to recover the ECU by flashing in boot mode.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
chienliu1972
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 50


« Reply #2 on: August 30, 2011, 11:26:23 PM »


I goolge the difference between "06A 906 032QJ" and "06A 906 032HA" in the below web site.

http://autos.groups.yahoo.com/group/VAG-COM/message/20824

the actual coding of the module is 0004 ( by VAG COM)
I checked this module in ETKA and it says that this
ECM has two emissions programs inside PRG 0GG and PRG
7GG, the interesting part is that program 0GG if for
EU4 compliance emissions ( Europe) and 7GG is for
TIER1 compliance emissions (Mexico version of Sharan)
I think that any of these programs is selectable by
coding. before 2005 there was a special version of the
module for the European Sharan (06A 906 032 QB)(
emissions program 0GG) and mexican Sharan (06A 906 032
HA)(emissions program 7GG) but it appears that this 05
ECM the QJ version has both has both. In ELSA it
doesnt gyve any info for coding it just refers you to
the Guided fault finding function of VAS 5052 for
coding, so I would like to know if it has some coding
options available and what other

Is it possible to change the difference emissions programs automatically in the flash, 29F800BB? How it works?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)