Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
Writing 95040 issue 8n0906018h
Pages: [
1
]
« previous
next »
Author
Topic: Writing 95040 issue 8n0906018h (Read 5114 times)
monk-e
Jr. Member
Karma: +0/-0
Offline
Posts: 26
Writing 95040 issue 8n0906018h
« on: January 11, 2016, 12:52:23 PM »
Hi, I'm having a bit of trouble getting argdubs tool to write to the 95040.
It's a 8n0906018h ecu. I've managed to read the chip through odb and done the modifications I wanted but I'm getting stuck on writing it back.
I believe the ecu is in boot mode (pin 24 grounded on power up) buy the program reporting:
Starting boot_mode ... uC identification response = 0xc5 <c167 derivatives> ... OK
But only gets as far as:
Initialising registers ... FAIL. <error=0x01>
Closing com4
Any help would be greatly appreciated
Logged
adam-
Hero Member
Karma: +124/-33
Offline
Posts: 2179
Re: Writing 95040 issue 8n0906018h
« Reply #1 on: January 11, 2016, 01:20:26 PM »
You know my thoughts.
Logged
monk-e
Jr. Member
Karma: +0/-0
Offline
Posts: 26
Re: Writing 95040 issue 8n0906018h
« Reply #2 on: January 11, 2016, 01:34:55 PM »
Quote from: adam- on January 11, 2016, 01:20:26 PM
You know my thoughts.
Indeed I do bud
Just wanted to ask to see if there's any other possibilities.
For some reason Ray says do not use the resistor on the bam ecu. He didn't explain why though
Logged
adam-
Hero Member
Karma: +124/-33
Offline
Posts: 2179
Re: Writing 95040 issue 8n0906018h
« Reply #3 on: January 11, 2016, 01:39:00 PM »
That said, I've only played with three so far but all three needed it. Checking the data sheet would verify the correct pin peculiar to this ECU.
Logged
jogtx16v
Full Member
Karma: +6/-1
Offline
Posts: 139
Re: Writing 95040 issue 8n0906018h
« Reply #4 on: January 11, 2016, 08:37:08 PM »
I can help. I don't use resistor and I never having problem to read/write in bootmode.
show me all your command line you use to write.
Logged
monk-e
Jr. Member
Karma: +0/-0
Offline
Posts: 26
Re: Writing 95040 issue 8n0906018h
« Reply #5 on: January 12, 2016, 11:02:55 AM »
Sorted it
Turns out the ecu will only play ball in boot mode at a baudrate of 57600
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 27, 2024, 05:22:30 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
