Pages: 1 [2] 3 4
Author Topic: ME7.1.1/7.5 Programming Not Finished - P0602, P1681 or 18089  (Read 105210 times)
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #15 on: March 26, 2014, 11:55:16 AM »

If you attempt to read a 2.7t Allroad or A6 4Z7907551AA, or 4Z7907551S, you will then be stuck with a "programming not completed" DTC, as well as a no start situation!

To remedy this, reconnect with nefmoto (which will still work, thank god for small miracles) and flash one of the attached files. Neither of these have this issue and are compatible with all BEL Allroads/A6's.

Any tuning done on ME7.1.1 equipped 2.7t's should use the 551R (North American) or 551N (Euro) file as a base to avoid complications.

« Last Edit: August 10, 2014, 10:51:14 AM by nyet » Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173


« Reply #16 on: March 26, 2014, 12:00:22 PM »

thanks for posting this
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #17 on: March 26, 2014, 12:02:37 PM »

No problem. You're the third person this week that's done this. With nefmoto gaining popularity, it warrants a warning. Good luck, and please report back.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173


« Reply #18 on: March 26, 2014, 12:04:43 PM »

i will say this has happened to me  with an early version of nefmoto on a b5 passat when i attemped to read it bricked the ecu. this was 2-3 years ago however. and i have not had an issue since except the allroad.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #19 on: March 26, 2014, 12:19:23 PM »

Reading an APR or United file will do this as well. My advice, have a recovery solution available before attempting any reading/writing.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
jackson.amrol@gmail.com
Full Member
***

Karma: +4/-6
Offline Offline

Posts: 128


"you sir are an animal"


WWW
« Reply #20 on: March 26, 2014, 09:33:21 PM »

Would not keying off prevent this?
Logged

Lost, No.. My minds around here somewhere..
Shh, I'm calling my mom.. "It's 3AM" SHH!
Mom, is there such a thing as kosher pork?
"I'm not bailing you out tonight"...
jackson.amrol@gmail.com
Full Member
***

Karma: +4/-6
Offline Offline

Posts: 128


"you sir are an animal"


WWW
« Reply #21 on: March 26, 2014, 09:40:54 PM »

Would not keying off prevent this?

AS IN can you simply notice, and write the file back.
or
can you not write until it has been keyed off?
Logged

Lost, No.. My minds around here somewhere..
Shh, I'm calling my mom.. "It's 3AM" SHH!
Mom, is there such a thing as kosher pork?
"I'm not bailing you out tonight"...
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #22 on: March 26, 2014, 10:00:03 PM »

It's not the file that's the issue, but the fact that nefmoto doesn't properly end the programming session. You can flash it back, then do a FULL READ, save the file, and MAYBE recover it, but it's unlikely. The 551R never fails.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
jackson.amrol@gmail.com
Full Member
***

Karma: +4/-6
Offline Offline

Posts: 128


"you sir are an animal"


WWW
« Reply #23 on: March 26, 2014, 10:42:03 PM »

THANK YOU Double D
Logged

Lost, No.. My minds around here somewhere..
Shh, I'm calling my mom.. "It's 3AM" SHH!
Mom, is there such a thing as kosher pork?
"I'm not bailing you out tonight"...
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #24 on: March 26, 2014, 10:59:38 PM »

Four people this week (no exaggeration) have emailed/messaged me after doing this. I hope this will prevent a few "what have I done!" moments.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #25 on: March 27, 2014, 07:51:45 AM »

The 06A906032RN has a similar issue. Same DTC, same problem, but the code doesn't actually cause any harm.

Just something to think about Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Snow Trooper
Hero Member
*****

Karma: +89/-24
Offline Offline

Posts: 689


WWW
« Reply #26 on: April 05, 2014, 11:02:19 AM »

Have had this happen and as stated the R file written over it fixes it.  The S file is very common, I have only had one not do this to me after reading it, not sure why.  I have also found that you can get by without changing to the R, you have to flash back in the stock file, disconnect, attempt to start, get the code, flash in again and then power down, disconnect the ecu from 12v, power back up and clear codes, then it will start.  But it is obviously easier to just switch and be done with that nonsense.
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #27 on: May 17, 2014, 10:45:02 AM »

Just to add had this same issue on an 04' beetle 2.0 ecu id 06A906032MS
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #28 on: May 17, 2014, 10:52:46 AM »

Just to add had this same issue on an 04' beetle 2.0 ecu id 06A906032MS

Pretty much anything newer than 03 is going to have this problem.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #29 on: May 19, 2014, 09:42:22 AM »

Pretty much anything newer than 03 is going to have this problem.

Thanks for clearing that up, D. I assume mpps doesn't have these types of protocol issues? How new a car can mpps interface with reliably?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: 1 [2] 3 4
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 18 queries. (Pretty URLs adds 0s, 0q)