me 3.8 rev limiter

Pages: [1] 2

« previous next »

Author

Topic: me 3.8 rev limiter (Read 9628 times)

putput

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	me 3.8 rev limiter « on: February 15, 2016, 12:14:55 PM »

Hi. I'm from Spain and y have a golf mk2 1.8t.
I'm doing my maps to 1.8t gt3071r (me3.8 AQ) but I can not change the rpm limiter.
I tried it with NMAXDV And NMAXF does not work
Someone could help me change the limiter?
Thanks


	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	Re: me 3.8 rev limiter « Reply #1 on: February 15, 2016, 08:31:41 PM »

it is not a single limiter.


	Logged

putput

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: me 3.8 rev limiter « Reply #2 on: February 16, 2016, 03:42:18 AM »

So I've read. I would like to know that maps affect rev limiter and learn to modify


	Logged

putput

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: me 3.8 rev limiter « Reply #3 on: February 16, 2016, 11:50:13 AM »

I found the limiter
In an ecu AQ find the following values

8A A3 A3 A4 AA AA C8 C8 C8 C8 C8 C8 8C A6 A5 A6 A7 AA AA AA AA A8 A8 A8 8A A3 A3 A4 A8 AA

If you multiply the map * 40, AA is 6800
If you change these values you get the cut in these rpm

https://youtu.be/bACywFQND7c


	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	Re: me 3.8 rev limiter « Reply #4 on: February 16, 2016, 01:31:00 PM »

correct.


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 826

	Re: me 3.8 rev limiter « Reply #5 on: February 17, 2016, 08:51:07 AM »

Quote from: putput on February 16, 2016, 11:50:13 AM

I found the limiter
In an ecu AQ find the following values
8A A3 A3 A4 AA AA C8 C8 C8 C8 C8 C8 8C A6 A5 A6 A7 AA AA AA AA A8 A8 A8 8A A3 A3 A4 A8 AA
If you multiply the map * 40, AA is 6800
If you change these values you get the cut in these rpm
https://youtu.be/bACywFQND7c

Nice find..... but problem is that those are not only a limiter like K0mpresd mentioned, those are group of "limiters" or values associated to it. I have notice those values too, the problem is to identify which ones are for what.
06A906018AQ is M383 and RPM limiters are in the same zones, but could share some similarities (I am not sure) with M382 ones that includes:
NMAXDV   Drehzahlbegrenzung bei Fehlererkennung Geschwindigkeitssignal
TNMAXDV   Verzögerungszeit für Drehzahlbegrenzung bei Ausfall des Geschwindigkeitssignals
RED1NMX   "Reduzierstufe bei Bedingung 1 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe"
RED2NMX   "Reduzierstufe bei Bedingung 2 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe"
RED3NMX   "Reduzierstufe bei Bedingung 3 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe"
RED4NMX   "Reduzierstufe bei Bedingung 4 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe"
NMXP    Drehzahlbegrenzung
NMAXWP   weiche Drehzahlgrenze
NMAXZP   Drehzahlgrenze für Zylinderabschaltung
NMAXDP   Dauerdrehzahlgrenze
NMAXHP   maximale Drehzahl für hartes Abschalten
DNMAXP   Drehzahlhysterese für Drehzahlbegrenzung
TVMAXHP   Zeitschwelle für Übergang in harte n/v-Begrenzung
DZUENMP   Delta ZW für weiche nmax-Begrenzung
ZWVNMAXP Max. Zündwinkelverstellung für weiche n/v-Begrenzung
FNMAXP   Abmagerungsfaktor bei weicher n/v-Begrenzung
DNMXHP   Hysterese für Drehzahlgrenzen
NMAXWHP   Umschaltschelle Drehzahlberenzung hart -> weich


« Last Edit: February 17, 2016, 11:01:36 AM by eliotroyano »	Logged

putput

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: me 3.8 rev limiter « Reply #6 on: February 17, 2016, 11:41:19 AM »

I changed the 7 "AA" values (all for the same) and works well.
i dont know the function of the other value maps
anyone knows the function of the other values?

I only have this maps in my ecu

NMAXDV
NMAXF
RED1NMX
RED2NMX
RED3NMX
RED4NMX
TNMAXDV

The cut is very slow, anyone know if there is any value to the cutoff time?

Sorry for my english. It is bad Grin


	Logged

Tezotto01

Full Member

Karma: +3/-12
Offline

Offline

Posts: 97

	Re: me 3.8 rev limiter « Reply #7 on: June 01, 2017, 05:31:26 PM »

Quote from: putput on February 16, 2016, 11:50:13 AM

I have already located this region and changed the AA values, but I did not succeed.
Could someone help me find the limiter in my bin?


	Logged

Tezotto01

Full Member

Karma: +3/-12
Offline

Offline

Posts: 97

	Re: me 3.8 rev limiter « Reply #8 on: June 12, 2017, 04:46:31 AM »

I got it, I was missing the address.
Now it worked perfectly!


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: me 3.8 rev limiter « Reply #9 on: October 02, 2021, 12:28:15 AM »

Can someone help I am struggling to find Nmax map in 559C

Right is AGU file where I found it, but comparing to AEB file I can't found it


	Logged

Leonhard

Full Member

Karma: +29/-2
Offline

Offline

Posts: 115

	Re: me 3.8 rev limiter « Reply #10 on: October 02, 2021, 01:48:15 AM »

this is what I got, similar to 558E

06C42 NMAXDV
06C44 TNMAXDV
06C46 RED1NMX
06C47 RED2NMX
06C48 RED3NMX
06C49 RED4NMX
06DD2 NMAXF (16Bit)


	Logged

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6037

	Re: me 3.8 rev limiter « Reply #11 on: October 02, 2021, 02:06:01 AM »

If I remember this correctly these are rpm's when it starts to cut individual cylinders.
And it's best not to set everything to the same value otherwise it's like driving into a wall.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: me 3.8 rev limiter « Reply #12 on: October 02, 2021, 06:54:09 AM »

Quote from: Leonhard on October 02, 2021, 01:48:15 AM

this is what I got, similar to 558E

06C42 NMAXDV
06C44 TNMAXDV
06C46 RED1NMX
06C47 RED2NMX
06C48 RED3NMX
06C49 RED4NMX
06DD2 NMAXF (16Bit)

Thank you but I need NMAX 5x6 map

Quote from: prj on October 02, 2021, 02:06:01 AM

If I remember this correctly these are rpm's when it starts to cut individual cylinders.
And it's best not to set everything to the same value otherwise it's like driving into a wall.

I am going to set it little higer all values, then try to put ignition cut to oroginal rpm via KFSRL


	Logged

Leonhard

Full Member

Karma: +29/-2
Offline

Offline

Posts: 115

	Re: me 3.8 rev limiter « Reply #13 on: October 03, 2021, 11:19:58 PM »

Ok, how about 07B64 NMAX 6x5 (8Bit)


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: me 3.8 rev limiter « Reply #14 on: October 04, 2021, 12:57:34 AM »

Quote from: Leonhard on October 03, 2021, 11:19:58 PM

Ok, how about 07B64 NMAX 6x5 (8Bit)

Please see pic I put in attachment above
On that address is MLHFM

EDIT: or maybe it is, I am going to try, because this is not MLHFM 100%
my bad sorry


« Last Edit: October 04, 2021, 01:04:06 AM by BlackT »	Logged

Pages: [1] 2

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 01:45:44 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search