NefMoto > Technical > Flashing and Chipping > Cannot connect to ECU via Vagcom/nefmoto, can however connect in boot mode??
Pages: [1]
« previous next »
Author Topic: Cannot connect to ECU via Vagcom/nefmoto, can however connect in boot mode??  (Read 5901 times)
infinkc
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 94
Anyone know what is going on?  Bench flashing/testing.  Cannot connect with vagcom or nefmoto.  In boot mode with galleto it will read and flash a bin fine.

Any ideas?
Logged
f up your ecu, i can help http://nefariousmotorsports.com/forum/index.php/topic,892.0title,.html
nd77_77_77
Newbie
*

Karma: +2/-1
Offline Offline

Posts: 8
programming sequence not done properly most likely, or incorrect checksums in the file that's in there.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
Vag-Com and NefMoto both use the communication protocols to communicate with the code on the ECU. Boot mode uses the communication systems built into the ROM of the processor.

If you cannot connect with Vag-Com or NefMoto, but can connect with boot mode, then likely the ECU code in the flash memory chip is corrupt and preventing the ECU from booting properly.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
infinkc
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 94
Quote from: Tony@NefMoto on September 13, 2011, 03:39:10 PM
Vag-Com and NefMoto both use the communication protocols to communicate with the code on the ECU. Boot mode uses the communication systems built into the ROM of the processor.

If you cannot connect with Vag-Com or NefMoto, but can connect with boot mode, then likely the ECU code in the flash memory chip is corrupt and preventing the ECU from booting properly.

thanks tony, do you know what chip location is the flash memory?
Logged
f up your ecu, i can help http://nefariousmotorsports.com/forum/index.php/topic,892.0title,.html
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
It is the 44 pin PSOP chip labelled 29F800 on the top of the circuit board.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 03:31:47 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)