Pages: [1]
Author Topic: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely  (Read 5541 times)
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



The vehicle is a 01 vw cabrio. My wife lost her transponder key. We have a key with no transponder that turns the car on for 1 second. Ive got a kkl 409.1 cable and I do have the ability and deaire to remove the ecu if necessary. Willing to try any option except give vw money. Located in san antonio.
Logged
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Whoops. Typo in the title. Meant how to read skc.
Logged
_nameless
Hero Member
*****

Karma: +370/-1835
Offline Offline

Posts: 2940




The only way to immo off this ecu is lift the Eeprom chip and dump with a chip burner, edit and reburn / resolder. You can't do it wit a cheap clone vag cable. It's a flea chip 24c02. Good luck 
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done??

Thanks I really appreciate your response.
Logged
_nameless
Hero Member
*****

Karma: +370/-1835
Offline Offline

Posts: 2940




Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done??

Thanks I really appreciate your response.
It won't work  Because it's in circuit. You need you lift it.
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay??
Logged
_nameless
Hero Member
*****

Karma: +370/-1835
Offline Offline

Posts: 2940




Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay??
I believe I have another m5.92 ecu I'll check when I get home if so I can immo off it for you and ship. The cabby has the aba with the dizzy still right?
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Yes its got the aba and the dizzy its a manual trans
Logged
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



vagcom says
037906018c
Component 2.0l r4/2v motr hs v02
Soft coding 00001
Shop # wsc 00066


And for immobilizer
6x0953257
Component immo 0007
Soft coding 00001
Shop # wsc 25072
Extra : xxxxxxxxxxxxxxxxx vwz1z0y07189459
Logged
eliotroyano
Hero Member
*****

Karma: +48/-12
Offline Offline

Posts: 833



I have test some M592 ECUs that it E2P can be read but not write ICSP. M38x nope at all. Best bet is to take  it out board for proper operation. 
« Last Edit: March 23, 2019, 07:00:42 PM by eliotroyano » Logged
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit?
Logged
eliotroyano
Hero Member
*****

Karma: +48/-12
Offline Offline

Posts: 833



So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit?

Yes but just to clarify I have been lucky with some ECUs. Others no. 
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 15 queries. (Pretty URLs adds 0s, 0q)