Pages: [1]
Author Topic: ME7 bench flash cable  (Read 10742 times)
ed1380
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« on: February 17, 2014, 02:29:53 AM »

OBD2 - Me7 harness for flashing your ecu in the comfort of your home.

-OEM connectors
-Red led indicator (only turns on when ecu is plugged in)
-Standard JST plug (available at any hobby store if you decide to change your power supply)
-All connections covered with adhesive lined heatshrink
-boot mode wire is soft silicone with a rubber end that is easier to grip and a solid core tip that will never fray.
The perimeter of the PCB has a ground strip that feeds the boot mode wire.

$40 Includes 3 day priority shipping

I have one ready to ship and should have another by the end of the day. I will update this as I get more.
Logged
pht_taxi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #1 on: November 03, 2014, 04:29:55 AM »

OBD2 - Me7 harness for flashing your ecu in the comfort of your home.

-OEM connectors
-Red led indicator (only turns on when ecu is plugged in)
-Standard JST plug (available at any hobby store if you decide to change your power supply)
-All connections covered with adhesive lined heatshrink
-boot mode wire is soft silicone with a rubber end that is easier to grip and a solid core tip that will never fray.
The perimeter of the PCB has a ground strip that feeds the boot mode wire.

$40 Includes 3 day priority shipping

I have one ready to ship and should have another by the end of the day. I will update this as I get more.

is this still available?
Logged
srk1979
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #2 on: July 19, 2015, 08:07:44 AM »

OBD2 - Me7 harness for flashing your ecu in the comfort of your home.

-OEM connectors
-Red led indicator (only turns on when ecu is plugged in)
-Standard JST plug (available at any hobby store if you decide to change your power supply)
-All connections covered with adhesive lined heatshrink
-boot mode wire is soft silicone with a rubber end that is easier to grip and a solid core tip that will never fray.
The perimeter of the PCB has a ground strip that feeds the boot mode wire.

$40 Includes 3 day priority shipping

I have one ready to ship and should have another by the end of the day. I will update this as I get more.
do you still have them for sale and if so how do I pay you to get one
Logged
overclockedpc
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 57


« Reply #3 on: August 21, 2015, 01:10:56 AM »

Would this work for a ME7.5?
Logged
xmodder
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #4 on: July 11, 2017, 07:17:24 PM »

OBD2 - Me7 harness for flashing your ecu in the comfort of your home.

-OEM connectors
-Red led indicator (only turns on when ecu is plugged in)
-Standard JST plug (available at any hobby store if you decide to change your power supply)
-All connections covered with adhesive lined heatshrink
-boot mode wire is soft silicone with a rubber end that is easier to grip and a solid core tip that will never fray.
The perimeter of the PCB has a ground strip that feeds the boot mode wire.

$40 Includes 3 day priority shipping

I have one ready to ship and should have another by the end of the day. I will update this as I get more.

anymore available?
Logged
vtraudt
Sr. Member
****

Karma: +3/-1
Offline Offline

Posts: 345


WWW
« Reply #5 on: May 23, 2018, 04:24:56 AM »

I am looking for a bench harness/cable for Me7.
Who has one?
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)