Pages: [1]
Author Topic: Seat leon med 9.1 read issue  (Read 698 times)
ianfr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: April 18, 2021, 01:12:06 AM »

Hi there, wondering if anyone can shed any light on a problem I have.
Obtained a seat leon 2007 2.0 tfsi bwa engine code.
Car runs drives well , but for some reason I cannot read the engine control module. I had a friend attempt to read with vcds but the error comes back engine control module not present, all other modules read out fine .error on door lock which is common but that's it . Unfortunately I don't have the scan to show .
The car is ex police car so I'm presuming it's not been tuned etc .
 Checked DLC port for resistance etc checked fuses now I'm lost. Any help would be greatly appreciated  regards ian
Logged
aef
Hero Member
*****

Karma: +54/-35
Online Online

Posts: 1307


« Reply #1 on: April 20, 2021, 12:27:37 AM »

scan/log with vcds version number would help
would remove ecu and try on the bench
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)